DIY How To Build a Homemade BBQ / Fire Pit || DIY BBQ Pit || Awesome DIY BBQ Pit || DIYFIREPIT

#diybbqgrill #diycharcoalgrill #Homemadebbqgrill

Hello and Thanks for watching. In this video I will show how to build an amazing fire-pit/BBQ. This grill will serve as fire pit and BBQ pit. Please let me know if you have any questions or suggestions in the comments below. Please Like, share and subscribe if you enjoyed the video. Thanks for your visit and your support. 🙏

SIMILAR VIDEOS: https://www.youtube.com/watch?v=C-Bi_7tODGc&list=PLuTlCiJ-_H-4wmly21wq0TROsjV9X6Ntu

Check out My other BBQ Grill Video. https://www.youtube.com/watch?v=5GY9tAPJd4o

SUBSCRIBE HERE https://www.youtube.com/channel/UCJ0gPdj6rK4j0GaFoqZ1BwQ?sub_confirmation=1

Materials Used

1) 20" Pipe - Top Grilling Ring - 1 3/4" long
2) 24" Pipe - Firepit - 12" long
3) 1 1/2 Pipe - legs- 8" long, including cut-out section.
4) 1" Pipe - Handles - 5" long nipple between the 90s and one 4 1/2" long nipple cut in half.
5) 3/4 Pipe - adjustable rod sleeve - 9 1/2" long
6) 1" Threaded 90 ELL - firepit handles - 4 Total
7) 1/2" Threaded 90 ELL with 5" Nipple between the 90s and one 3" long nipple cut in half - Top Cover handle
8) 3" Casters - legs - 3 Total
9) 1/4" Plate - Leg Base Plate - 4 1/2" Diameter
10) 3/4 Cold Rolled Steel - Top cover side handle and grilling ring adjustable height rod - 14" long
11) 3/4 Cold Rolled Steel - Grilling ring adjustable height rod V-shape pieces - 3" long, two pieces total, one end cut at approximately 22 degree angle, the other end flat.
12) 1/2" Angle Iron - Clips welded inside 24" pipe that support wood/charcoal grate - 2" long, 4 total @ 3 1/2" from the bottom.
13) 3/8" bolts and nuts - T-handle set screw and T-handle.
14) 1/4" Nuts and Bolts - Casters
15) 3/8" Square Steel Bar - grilling grate support bars - One piece @ 19 1/4" and two pieces @
9 7/16"
16) 3/8" Square Steel Bar - wood/charcoal heavy duty expanded metal handles - 8" wide
17) 1/2" x #13 Expanded Metal - Grilling Grate - 20" Diameter
18) Heavy Duty Expanded Metal - wood/charcoal grate - 22 1/2" Diameter
19) 14 gauge Sheet Metal - top cover - 20 3/8" with 5/8" lip
20) 1/8" Sheet Metal - Bottom Cover welded fire-pit - 24" Diameter
21) Welding Chipping Hammer Handle - Grilling grate side handle - One needed

Видео DIY How To Build a Homemade BBQ / Fire Pit || DIY BBQ Pit || Awesome DIY BBQ Pit || DIYFIREPIT канала AX Creates