#MT25 Part 11 - Making a Stuart 10V Steam Engine. The Valve Chest and Cover. By Andrew Whale.
So - After the successful build of my Stuart S50 Steam Engine, I decided to have a go at making a Stuart 10V Steam Engine!
This video is Part 11, which shows me machining the valve chest and cover (aka steam chest and cover).
All the machining was carried out on my Sieg SC4 lathe and my SX2P mini mill.
Future videos will cover the valve assembly, painting, final build and, hopefully, a test under steam.
Many thanks to Peter (aka Model Steamers) for his help and advice. Please check out his YouTube channel at:
https://www.youtube.com/channel/UCu7zQCwO7y8BAEH2y4Y3XOQ
If you can offer me any help or advice, please leave a comment.
If you would like to keep informed of my new videos, please subscribe.
If you find my videos of value you could always help me continue making them by making a small donation at:
paypal.me/AndrewWhale
Backing track credits......
Music: (intro) Water Lily by the 126ers - YouTube Audio Library
WARNING: Metal turning can be dangerous! I am not sure whether the methods I use are established ones, and I do not recommend them.
Please do not copy me without doing your own risk assessments!
You are responsible for your safety - not me!
Видео #MT25 Part 11 - Making a Stuart 10V Steam Engine. The Valve Chest and Cover. By Andrew Whale. канала Learning Turning Metal - by Andrew Whale
This video is Part 11, which shows me machining the valve chest and cover (aka steam chest and cover).
All the machining was carried out on my Sieg SC4 lathe and my SX2P mini mill.
Future videos will cover the valve assembly, painting, final build and, hopefully, a test under steam.
Many thanks to Peter (aka Model Steamers) for his help and advice. Please check out his YouTube channel at:
https://www.youtube.com/channel/UCu7zQCwO7y8BAEH2y4Y3XOQ
If you can offer me any help or advice, please leave a comment.
If you would like to keep informed of my new videos, please subscribe.
If you find my videos of value you could always help me continue making them by making a small donation at:
paypal.me/AndrewWhale
Backing track credits......
Music: (intro) Water Lily by the 126ers - YouTube Audio Library
WARNING: Metal turning can be dangerous! I am not sure whether the methods I use are established ones, and I do not recommend them.
Please do not copy me without doing your own risk assessments!
You are responsible for your safety - not me!
Видео #MT25 Part 11 - Making a Stuart 10V Steam Engine. The Valve Chest and Cover. By Andrew Whale. канала Learning Turning Metal - by Andrew Whale
Показать
Комментарии отсутствуют
Информация о видео
3 марта 2019 г. 0:40:46
00:27:36
Другие видео канала
![#MT25 Part 12 - Making a Stuart 10V Steam Engine. The Eccentric Strap and Sheave. By Andrew Whale.](https://i.ytimg.com/vi/pfvpFlQ_6NI/default.jpg)
![Let's Make a Model Steam Engine : Valve And How It Works](https://i.ytimg.com/vi/kJRUXvV4IQs/default.jpg)
![Making A Twin Nitro Engine](https://i.ytimg.com/vi/sJNhK49EPrg/default.jpg)
![Machining Matching Male & Female Dovetails](https://i.ytimg.com/vi/FO7VKm-aBqU/default.jpg)
![STEAM ENGINE VALVE TIMING - MODEL STEAM ENGINES FOR BEGINNERS #1](https://i.ytimg.com/vi/YyIZQb-t9mc/default.jpg)
![Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]](https://i.ytimg.com/vi/k2a9ywCEK_A/default.jpg)
![The Infamous Mini Lathe!](https://i.ytimg.com/vi/05vUCdzhoe4/default.jpg)
![#MT41 Part 3 - Philip Duclos Odds n Ends Engine. Making Cast Iron Piston Rings. In 4K by A Whale.](https://i.ytimg.com/vi/7L4rNagoOzo/default.jpg)
![STUART NUMBER ONE STEAM ENGINE REPAIR - PART #1](https://i.ytimg.com/vi/oQnNWlKI--U/default.jpg)
![Let's Build a Model Steam Engine : Oiling System!](https://i.ytimg.com/vi/agU9owXr9_g/default.jpg)
![Easy Stuart S50 Build Part 6 The Steam Chest](https://i.ytimg.com/vi/HsA93PmthWE/default.jpg)
![#MT24 - Thread cutting on my Sieg SC4 lathe. By Andrew Whale.](https://i.ytimg.com/vi/15bNdtqLs80/default.jpg)
![QCTP Tool Holders for the Lathe](https://i.ytimg.com/vi/ZNWkhxKNHGM/default.jpg)
![16 Cylinder Gas Powered Stirling Engine](https://i.ytimg.com/vi/nSE3GmUdxoQ/default.jpg)
![Metal Lathe Indexing Wheel](https://i.ytimg.com/vi/pTzyzqRcmao/default.jpg)
![Steam Locomotive Cutaway Model Tutorial (Working)](https://i.ytimg.com/vi/c-ocR_AYDlA/default.jpg)
![Steam Engine cylinder casting and valves](https://i.ytimg.com/vi/1RSYpAaCj0g/default.jpg)
![Machining a Cast Iron Bearing](https://i.ytimg.com/vi/L5yVpvCav_U/default.jpg)
![HOW TO MAKE A STUART DOUBLE 10V STEAM ENGINE WORK - IN THE WORKSHOP](https://i.ytimg.com/vi/7cdluniu7nk/default.jpg)
![Machining a Cube on a Lathe](https://i.ytimg.com/vi/-2ygW0fSnjg/default.jpg)