How I Removed and Replaced Hot Water Tank Anode Rod with a Walmart $40 Impact Wrench
How I removed and replaced a Hot Water Tank Anode Rod with a $40 impact wrench from Walmart.
Note - before attempting to remove the anode rod, be sure to shut off the water intake valve to the Hot Water tank and drain a couple gallons of water out of the Hot Water tank first! Draining a couple gallons of water will help to relieve the internal water pressure inside the tank but at the same time maintaining as much weight as possible in the tank to try to minimize the possibility of the tank from turning in the process of trying to remove the anode rod. Especially important if you do not have an assistant with you to help hold the tank from turning or spinning.
Impact Wrench - https://www.walmart.com/ip/Hyper-Tough-6901-1-7-5-Amp-1-2-Corded-Impact-Wrench/47486482
Socket used: 1 1/16" 6 point 1/2" drive impact socket - available at hardware stores or online.
** STANDARD YOUTUBE DISCLAIMER ** I am not a professional mechanic or handyman. Methods or suggestions described herein this video may not be the only solution or methods that may be applicable to similar situations. I take no responsibility if anyone should attempt the described methods herein. Any and all actions you may take are at your own risk. As always, you are strongly recommended to be sure to use all safety protocols and wear all appropriate safety gear when performing any repairs and working with tools and equipment. In addition, I am not a paid actor and I do not employ a professional video production company to produce my videos. So please do not comment on the quality or production of any of these videos. YouTube is a global resource that provides a free forum to the general public to share ideas and information to help one another. So if you have a better idea or a better way to do something, rather than leave negative comments on other peoples videos, please upload your own video showing your better way - and that will help everybody out. Thank you! **
Видео How I Removed and Replaced Hot Water Tank Anode Rod with a Walmart $40 Impact Wrench канала Godchaserwi1
Note - before attempting to remove the anode rod, be sure to shut off the water intake valve to the Hot Water tank and drain a couple gallons of water out of the Hot Water tank first! Draining a couple gallons of water will help to relieve the internal water pressure inside the tank but at the same time maintaining as much weight as possible in the tank to try to minimize the possibility of the tank from turning in the process of trying to remove the anode rod. Especially important if you do not have an assistant with you to help hold the tank from turning or spinning.
Impact Wrench - https://www.walmart.com/ip/Hyper-Tough-6901-1-7-5-Amp-1-2-Corded-Impact-Wrench/47486482
Socket used: 1 1/16" 6 point 1/2" drive impact socket - available at hardware stores or online.
** STANDARD YOUTUBE DISCLAIMER ** I am not a professional mechanic or handyman. Methods or suggestions described herein this video may not be the only solution or methods that may be applicable to similar situations. I take no responsibility if anyone should attempt the described methods herein. Any and all actions you may take are at your own risk. As always, you are strongly recommended to be sure to use all safety protocols and wear all appropriate safety gear when performing any repairs and working with tools and equipment. In addition, I am not a paid actor and I do not employ a professional video production company to produce my videos. So please do not comment on the quality or production of any of these videos. YouTube is a global resource that provides a free forum to the general public to share ideas and information to help one another. So if you have a better idea or a better way to do something, rather than leave negative comments on other peoples videos, please upload your own video showing your better way - and that will help everybody out. Thank you! **
Видео How I Removed and Replaced Hot Water Tank Anode Rod with a Walmart $40 Impact Wrench канала Godchaserwi1
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Flush a Water Heater? | Flushing Will Probably Not Fix Your ProblemHow to Replace a Corroded Water-Heater Fitting | This Old HouseFour Water Heater Tanks Cut Open - Lessons to LearnHow To Replace the Anode Rod in Your Water Heater Step-By-StepKobalt - VS - Harbor Freight 1/2" Corded Impact WrenchesHow to Replace the Anode in a Water Heater | Repair and ReplaceWater Heater Anode Rod Replacement (Stop Rusty, Smelly Hot Water!)Stuck water heater AnodeHow to Replace A Water Heater Sacrificial Anode RodHow to Change a Water Heater Anode Rod | This Old HouseWater Heater Repair Replacing a Corroded Supply LineHow to Prevent Plumbing Sulfur Smells | Ask This Old HouseHow a Gas Water Heater WorksHow to Replace Anode Rod in a Water Heater - Step by StepHot Water Smells Like Sulfur, Rotten egg. Removing Anode RodHow To Get Rid of Smelly Hot Water - Easy Fix!How To Get Rid of Rotten Egg Smell in Your Hot WaterHow To Flush A Hot Water Heater To Remove SedimentEasy Water Heater Lime RemovalBest Residential Water Heater - Bradford vs Rheem and AO Smith - Twin Plumbing