3D Printed DJI Caddx Vista Canopy for Beta95x whoop frame

I've recently upgraded from analogue FPV video to HD using the DJI HD FPV system, and have designed a canopy for the Beta95x whoop frame using the Caddx Vista transmitter.

The canopy must be printed in TPU filament. The video transmitter is located at bottom, whilst the HD camera is at the top. There is a slot for the antenna to attached at a 45 degree angle.

The printed TPU canopy weighs 5.5g, and doesn't need screws to hold the video transmitter - the base of the canopy has a cavity to cradle the transmitter but you need to flex the legs to slide it into place. Once screwed to the frame it is locked in place.

A very special thank you to my Patrons:
►https://www.patreon.com/Tech2C

Download the DJI Caddx Vista Canopy from Thingiverse:
►https://www.thingiverse.com/thing:4330877

DJI Caddx Vista:
►https://www.banggood.com/Caddx-Vista-HD-Digital-System-5_8GHz-FPV-Transmitter-VTX-FOV-150-Degree-Camera-1080P-Recording-AIO-Compatible-DJI-FPV-Goggles-Remote-Controller-For-Small-Drones-Whoop-Airplane-p-1625165.html?p=9X051049165582016063

DJI FPV Goggles HD:
►https://www.banggood.com/DJI-FPV-Goggles-HD-Digital-5_8Ghz-1440+810-720p-or-120fps-Low-Latency-with-DVR-Compatible-With-Caddx-Vista-for-FPV-Racing-Drone-RC-Airplane-p-1546929.html?p=9X051049165582016063

Buy cheap 3D Printer kits and parts from Banggood:
►http://goo.gl/bFyz5H

Amazon 3D Printers and Parts:
►http://amzn.to/2qdTebt

Видео 3D Printed DJI Caddx Vista Canopy for Beta95x whoop frame канала Tech2C