How to Change Boat Engine Oil (On The Water)

How to Change Boat Engine Oil

Captain Cody shows how to change boat engine oil with the boat on the water. This is done by using a manual vacuum fluid extractor pump tank. Other than that is similar to any other boat oil change.

Here is a link to the pump.
https://www.amazon.com/gp/product/B06WD64H8Z

The pump works by pulling the handle up and down about 15 times. This pulls air out of the tanks creating a low-pressure area. the oil gets sucked up the tube and into the tank reservoir.

Steps to change the oil.

1) Remove engine cowling.
2) Remove the dipstick and place an extractor tube into the engine.
3) Pump handle and wait for the oil all the oil to be pulled from the engine. Make sure the engine is level.
4) Remove the old oil filters.
5) Secure the new oil filter, go as tight as you can by hand. Also, apply a small amount of oil to the seal of the filter.
6) Add new engine oil back into the motor.
6) Check level with the dipstick and place the cowling back on the motor.

I hope this video helps when changing boat engine oil.

Thanks for watching,

Captain Cody

Видео How to Change Boat Engine Oil (On The Water) канала Captain Cody