Manganese Wash with Stroke & Coat and Stoneware Glaze

Products Used:
SB-110 Dessert Bowl
SW-173 Amber Quartz
SW-303 Manganese Wash
SC-29 Bluegrass
RB-140 #8 Soft Fan
AC-222 Medium Writer Tip Kit
AC-224 Plastic Detailer Cap
Sponge

1. Begin with properly fired cone 04 stoneware bisque. Moisten a sponge and wipe bisque to remove any dust.

2, Using the AC-222 Medium Writer Tip Kit, apply SW-303 Manganese Wash in a pattern around the rim. We applied 2 rows of “w”s so there is a space to add the Stroke & Coat.

3. Exchange the cap on you SC for an AC-224 Plastic Detailer Cap and apply SC-29 Bluegrass as dots inside of the loops made with the wash.

4. Allow to dry and repeat steps 1 and 2.

5. Allow the glaze to dry.

6. Apply 3 coats of SW173 Amber Quartz to both the inside and the outside of the bowl. Allow the glaze to dry in between coats and avoid glazing the foot.

7. Use a damp sponge to wipe away any glaze that may have gotten on the foot.

8. Fire to cone 5/6. *Sample piece was fired to cone 6*

***This is a project that requires a degree of practical consideration when being used for dinnerware. If you are applying the project to a vessel in which the glaze can pool, the build up of glaze in those areas can potentially craze pretty severely and in that instance would not be ideal for dinnerware use***

Видео Manganese Wash with Stroke & Coat and Stoneware Glaze канала MaycoColors