Finishing a Polymer80 G150 Kit Receiver - Phoenix2 system - TacFix

Using the Polymer80 G150 Kit Phoenix2 system.

Jeremy Bedsaul from TacFix recently shared his first experience with the Polymer80 in this step-by-step video with ARBuildJunkie.com.

He takes a close look at the Polymer80 G150 Kit and goes through the process of using a drill press and supplied jig to modify the Polymer 80% lower.

Be sure to like this video if you do, save it and subscribe for more!

Check out our website for the latest news, info, and deals on the parts you want:
https://www.arbuildjunkie.com/

Additional Notes:

The Polymer80, Phoenix2, AR15 80% Lower and Jig System Includes the Phoenix2 system

This system is designed as a complete kit. There's NO expensive jig kits and parts to purchase - the system is a COMPLETE, all-inclusive package in one box!

The Phoenix, Gen2 version features Polymer80's proprietary polymer composite, a solid core design, stiffened magwell, and MILSPEC buffer tube housing. The pistol grip area features a unique no-thread design specific to Polymer80 lowers.

The jig is included in the price of this system The kit comes with drill bits and the end mill bit that's required to finish your AR project the right way.

The 80% "receiver blank" is defined by the ATF and therefore has not yet reached a stage of manufacture that meets the definition of firearm frame or receiver found in the Gun Control Act of 1968 (GCA).
http://www.atf.gov/content/contact-us/pressroom/receiver-blanks-Q%26As

Polymer80 ar 15 lower build

Видео Finishing a Polymer80 G150 Kit Receiver - Phoenix2 system - TacFix канала AR Build Junkie