How to Quickly Patch a Hole in Drywall - Mesh Tape Trick

Typically, you use adhesive based mesh tape to strengthen joints during drywall installation. It is also very useful when trying to repair drywall line cracks. You can also use it to repair drywall holes, by putting it on top of the hole. SUBSCRIBE!!! https://www.howtoanalyzedata.net/youtube

In this tutorial we will explore another option on how it can be used to provide extra strength and support inside the hole. This might be useful if you are trying to strengthen drywall anchor and need small area inside drywall to provide additional extra strength.
I used this mesh tape technique on multiple projects. I used it to strengthen drywall anchor, which was supporting heavy mirror and became loose. I have also used it to fill 1 inch drywall hole after removal of wall humidifier control.
Some advantages this method provides:
1) Your working are is smaller. When you use mesh tape on top of the drywall you end up with large working are, you then need to cover with texture and paint. If you can find original texture and original paint this is no issue, but if you can’t, like in my case, smaller area means smaller noticeable imperfections after the repair
2) You provide additional reinforcement inside the wall. By putting mesh tape inside the wall and mixing it with spackle, you provide additional strength inside the wall. This is especially useful if you are trying to repair loose wall anchors: you can’t move them to a different spot and need to specifically repair them in one particular spot.

Tools you will need needed
Drywall 6” knife: https://www.howtoanalyzedata.net/drywall-6-inch-knife
Drywall Patch Spackle: https://www.howtoanalyzedata.net/drywall-patch-spackle
Drywall mesh tape: https://www.howtoanalyzedata.net/drywall-mesh-tape

Other helpful Drywall repair tools, if you are planning to do multiple similar projects:
Drywall knife set: https://www.howtoanalyzedata.net/drywall-knife-set
Drywall mud pan: https://www.howtoanalyzedata.net/drywall-mud-pan
Electrical tape (to cover open wires): https://www.howtoanalyzedata.net/electrical-tape

Some helpful tips:
You can clean up leftovers of drywall patch spackle with wet paper towel. Once spackle dries out you can only use sanding to create finish look. But you can use up paper towel 15-20 min after you applied patch, while spackle it is still wet, and this way you can avoid mess, created by sanding.
When you do first patch the hole may not blend perfectly with the wall. Leave it to dry overnight to let your draft patch harden. You can make another coat of patch next day, to create smooth surface and make it blend with drywall better.

Good Luck on your Project!!!

SUBSCRIBE!!!: https://www.howtoanalyzedata.net/youtube
------------------------------------------
My other YouTube Tutorials: https://www.howtoanalyzedata.net/youtube-tutorials/

------------------------------------------
Online Training Courses to succeed on any level: https://www.howtoanalyzedata.net/online-training/

LET'S CONNECT!!!!!
Thanks for all your support. Good luck on your projects!!! Please Subscribe and stay in touch to share your successes!!!
• Online Training for Everyone (Web Site): http://howtoanalyzedata.net
• YouTube: http://howtoanalyzedata.net/youtube
• Email: http://howtoanalyzedata.net/email
• Twitter: http://howtoanalyzedata.net/twitter
• Facebook: http://www.howtoanalyzedata.net/facebook
DISCLAIMER: This description contains affiliate links that help support this channel. This commission comes at no additional cost to you. If you click on a link and choose to make a purchase on the same date, Online Training for Everyone channel receives a small commission. It allows us to continue to make new videos like this one. I personally choose all of these links to help build confidence in and to educate my audience.

Thank you for all your help and support!!!

Видео How to Quickly Patch a Hole in Drywall - Mesh Tape Trick канала Online Training for Everyone