Resin 3D Printing Iron Man Gauntlets: The Complete Process
Thank you to this video's sponsor, @phrozen3d , for providing the amazing Phrozen Sonic Mega 8K for this build! https://phrozen3d.net/aIdEy
Welcome to the next phase of my journey to create a high-tech Iron Man suit! In this episode, we're diving deeper into the realm of 3D printing and taking on the resin printing process for the gauntlets. This should be a good resin walkthrough for anyone looking at using resin for cosplay.
We're tackling:
- Laying out the parts in Chitubox slicer
- Resin printing with engineering grade resin on a Phrozen Sonic Mega 8K Resin 3D printer
- Steps post printing: removing the prints from the build plate and cleaning the parts
- Prepping for curing: removing supports
- Curing the parts in the Phrozen Curing Station
- Trying on the completed gauntlets for a perfect fit
I'll also be discussing selecting the right resin for cosplay or engineering projects and the advantages of printing in resin over using an FDM printer. Join me as we explore the intricacies of 3D printing and continue to bring the Iron Man suit to life.
As always, don't forget to subscribe and hit the notification bell to stay updated on my progress. The next step in this journey will be finishing and painting the gauntlets.
If you enjoyed the video, I'd appreciate if you could leave a comment and hit the like button. Your support means a lot!
#IronMan #Resin3DPrinting #CosplayEngineering
Chitu Resin Settings: https://www.chitusystems.com/conjure-resin-settings/
---------------------------------------------------------------
Printer:
Phrozen Sonic Mega 8K
Direct: https://phrozen3d.net/aIdEy
Phrozen Wash & Cure Kit
Direct: https://www.jdoqocy.com/click-100836610-15455799?url=https%3A%2F%2Fphrozen3d.com%2Fproducts%2Fwash-cure-kit%3Fvariant%3D43562253025467
Amazon: https://amzn.to/3ZIEXUD
Resin and Equipment:
Chitu Systems Conjure Rigid Resin: https://amzn.to/3IugGMg
Large Silicone Mat: https://amzn.to/3Ms6dCc
Cordless Air Dryer: https://amzn.to/45nfpAa
Chemical Resistant Latex Gloves: https://amzn.to/3BJ0R0v
Components:
Adafruit QT Py ESP32-S2: https://bit.ly/QtPYESP32S2
Adafruit LiIon or LiPoly Charger BFF: https://bit.ly/AdafruitBFF
Adafruit LSM6DSO32: https://bit.ly/LSM6DSO32
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long: https://bit.ly/stemma50mm
For Amazon Links: As an Amazon Associate I earn from qualifying purchases.
Other purchase links may also be affiliate links.
---------------------------------------------------------------
All music courtesy of www.epidemicsound.com
@epidemicsound
---------------------------------------------------------------
Buy my NEW t-shirt!
Short Sleeve: https://amzn.to/3NVZnaq
Long Sleeve: https://amzn.to/3I2qNrq
You can support my work monthly (or yearly) on Patreon:
https://www.patreon.com/KerseyFabrications
You can support my work via one-time PayPal donations:
https://www.paypal.me/kerseyfabs
Where to find me on Social Media:
Facebook: https://www.facebook.com/kerseyfabs
Instagram: https://www.instagram.com/kerseyfabs
Twitter: https://twitter.com/KerseyFabs
Contact: kris@kerseyfabrications.com
You can send me fan mail!
Kersey Fabrications
5885 Cumming Hwy
Suite 108-262
Sugar Hill, GA 30518
Privacy Policy: https://drive.google.com/file/d/1zEBGgrCFxJJNmv3PJJ1-I2DcQtv2cXjW/view?usp=sharing
Terms of Service: https://drive.google.com/file/d/12SaTTdokTTmvwS61yr0HYBqnAXmNBBCp/view?usp=sharing
Видео Resin 3D Printing Iron Man Gauntlets: The Complete Process канала Kersey Fabrications
Welcome to the next phase of my journey to create a high-tech Iron Man suit! In this episode, we're diving deeper into the realm of 3D printing and taking on the resin printing process for the gauntlets. This should be a good resin walkthrough for anyone looking at using resin for cosplay.
We're tackling:
- Laying out the parts in Chitubox slicer
- Resin printing with engineering grade resin on a Phrozen Sonic Mega 8K Resin 3D printer
- Steps post printing: removing the prints from the build plate and cleaning the parts
- Prepping for curing: removing supports
- Curing the parts in the Phrozen Curing Station
- Trying on the completed gauntlets for a perfect fit
I'll also be discussing selecting the right resin for cosplay or engineering projects and the advantages of printing in resin over using an FDM printer. Join me as we explore the intricacies of 3D printing and continue to bring the Iron Man suit to life.
As always, don't forget to subscribe and hit the notification bell to stay updated on my progress. The next step in this journey will be finishing and painting the gauntlets.
If you enjoyed the video, I'd appreciate if you could leave a comment and hit the like button. Your support means a lot!
#IronMan #Resin3DPrinting #CosplayEngineering
Chitu Resin Settings: https://www.chitusystems.com/conjure-resin-settings/
---------------------------------------------------------------
Printer:
Phrozen Sonic Mega 8K
Direct: https://phrozen3d.net/aIdEy
Phrozen Wash & Cure Kit
Direct: https://www.jdoqocy.com/click-100836610-15455799?url=https%3A%2F%2Fphrozen3d.com%2Fproducts%2Fwash-cure-kit%3Fvariant%3D43562253025467
Amazon: https://amzn.to/3ZIEXUD
Resin and Equipment:
Chitu Systems Conjure Rigid Resin: https://amzn.to/3IugGMg
Large Silicone Mat: https://amzn.to/3Ms6dCc
Cordless Air Dryer: https://amzn.to/45nfpAa
Chemical Resistant Latex Gloves: https://amzn.to/3BJ0R0v
Components:
Adafruit QT Py ESP32-S2: https://bit.ly/QtPYESP32S2
Adafruit LiIon or LiPoly Charger BFF: https://bit.ly/AdafruitBFF
Adafruit LSM6DSO32: https://bit.ly/LSM6DSO32
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long: https://bit.ly/stemma50mm
For Amazon Links: As an Amazon Associate I earn from qualifying purchases.
Other purchase links may also be affiliate links.
---------------------------------------------------------------
All music courtesy of www.epidemicsound.com
@epidemicsound
---------------------------------------------------------------
Buy my NEW t-shirt!
Short Sleeve: https://amzn.to/3NVZnaq
Long Sleeve: https://amzn.to/3I2qNrq
You can support my work monthly (or yearly) on Patreon:
https://www.patreon.com/KerseyFabrications
You can support my work via one-time PayPal donations:
https://www.paypal.me/kerseyfabs
Where to find me on Social Media:
Facebook: https://www.facebook.com/kerseyfabs
Instagram: https://www.instagram.com/kerseyfabs
Twitter: https://twitter.com/KerseyFabs
Contact: kris@kerseyfabrications.com
You can send me fan mail!
Kersey Fabrications
5885 Cumming Hwy
Suite 108-262
Sugar Hill, GA 30518
Privacy Policy: https://drive.google.com/file/d/1zEBGgrCFxJJNmv3PJJ1-I2DcQtv2cXjW/view?usp=sharing
Terms of Service: https://drive.google.com/file/d/12SaTTdokTTmvwS61yr0HYBqnAXmNBBCp/view?usp=sharing
Видео Resin 3D Printing Iron Man Gauntlets: The Complete Process канала Kersey Fabrications
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![EDF 3D Printed Quadcopter: Adding a Brain (Flight Controller Upgrade)](https://i.ytimg.com/vi/j6EvjmtEpVA/default.jpg)
![EDF Quadcopter 2.0: Time to Evolve](https://i.ytimg.com/vi/Z1aSuYq2DKE/default.jpg)
![HUGE 3D Printed Death Star Pumpkin! Comgrow T500 Print!](https://i.ytimg.com/vi/UFZByARS0JE/default.jpg)
![Unboxing & Testing: The Colossal Comgrow T500 3D Printer!](https://i.ytimg.com/vi/coBmZ2YspRw/default.jpg)
![Off-the-Shelf Cyberpunk Cosplay!](https://i.ytimg.com/vi/8EdaT3tWgmQ/default.jpg)
![Hello Friday. Are we ready for DragonCon? #ironman #friday #ai](https://i.ytimg.com/vi/dUCTkWBIowQ/default.jpg)
![Kersey Fabrications Live!: Iron Man Arc Reactor Upgrades](https://i.ytimg.com/vi/ITlBJwaKV8E/default.jpg)
![Unleashing Innovation: Learning and Pushing the Boundaries #3dprinting #ironman #drone #shorts](https://i.ytimg.com/vi/HMy0Mh0En9g/default.jpg)
![3D Printed EDF Drone: Learning to Fly](https://i.ytimg.com/vi/Pm2M0EFqBuo/default.jpg)
![My first JARVIS/FRIDAY AI running on my Iron Man helmet! #openai #ironman](https://i.ytimg.com/vi/AtU31t8pNBI/default.jpg)
![3D Printing Failures Happen To All of Us! #3dprinting #3dprintingfails #shorts](https://i.ytimg.com/vi/-ZNXyJg4wAA/default.jpg)
![Flexible Resin 3D Printing Functional, Wearable Parts](https://i.ytimg.com/vi/tUtCxuajE7s/default.jpg)
![Making It Real: Adding High Tech to Cosplay - MomoCon 2023 Panel](https://i.ytimg.com/vi/VqIy6NqLDZM/default.jpg)
![Peter B. Parker Cosplayers: MomoCon World Record Attempt #SpiderMan #acrossthespiderverse #cosplay](https://i.ytimg.com/vi/aaTO5s86BH0/default.jpg)
![400+ Spider-Man Meme! #MomoCon2023 #Cosplay](https://i.ytimg.com/vi/2JnavwOqDgU/default.jpg)
![Testing a remote control EDF for the first time! #shorts](https://i.ytimg.com/vi/3po8IFQ-Kac/default.jpg)
![Building Iron Man Gauntlets: From Prototype to Resin Printing](https://i.ytimg.com/vi/kCTbZjCH0Tg/default.jpg)
![3D Printed Metal Iron Man Repulsors with HUD Monitoring](https://i.ytimg.com/vi/ANk_FV8FuZU/default.jpg)
![Phrozen Sonic Mega 8K: Yosh Studios Megatron Statue #shorts](https://i.ytimg.com/vi/JX-wQ3coOHQ/default.jpg)
![Phrozen Sonic Mega 8K: A Resin Printer That Delivers! #shorts](https://i.ytimg.com/vi/B5DCtQGIqJE/default.jpg)