SHORTEN WIRES FOR A FACTORY LOOK – RC CAR Tips & How to From The Workshop

In this video I'll be showing you how to wire your RC car for that clean factory look, no matter the scale 1/8 & 1/10 & 1/5 Nitro or Electric these tips will help you all!

And today I'll be showing you on the Mecatech FW01 we'll be shortening servo wires, tidying up the receiver box and so much more DIY RC stuff!!

If anyone’s inspired to give tidying up the RC Wiring here are the links to the items used in the video!

Crimpers:
https://hobbyking.com/en_us/hobbyking-jst-sh-connector-crimping-tool.html?affiliate_code=TKDLRXENYHGYYVW&_asc=26912285

Plugs:
https://hobbyking.com/en_us/jst-sh-servo-plug-set-futaba-gold-plated-10pairs-set.html?affiliate_code=TKDLRXENYHGYYVW&_asc=2279155419

Power Switch:
https://hobbyking.com/en_us/trackstar-power-switch.html?affiliate_code=TKDLRXENYHGYYVW&_asc=5856300912

Servo Splitter:
https://hobbyking.com/en_us/servo-splitter-lead-1-male-to-5-female-6cm.html?affiliate_code=TKDLRXENYHGYYVW&_asc=2133744025

Видео SHORTEN WIRES FOR A FACTORY LOOK – RC CAR Tips & How to From The Workshop канала Mark Thomasson