The #1 Flight Controller Failure ?

So I have some new stuff in the mail recently, donated by Elia(thanks buddy).
And I wanted to talk about what I think it's the #1 failure found on recent flight controllers:
The MCU.
Because we use open electronics, it is very easy to poke the wrong thing... or doing a little mistake when soldering and one FC could go bad in an instant!
Take it easy and check everything before plugging in the lipo and most of all don't wiggle things around when powered, especially with screwdrivers, wires, basically anything metal.
It would be really beneficial if some could donate their broken stuff for creating new videos.
Thanks!

Tools I use:
Hot Air Station: https://www.banggood.com/custlink/KDGm7y06dd
Microscope: https://www.banggood.com/custlink/mGm3MtaJV3
Microscope camera: https://www.banggood.com/custlink/m3vEEKBauo
Camera adapter: https://www.banggood.com/custlink/K333kPa44b
PCB holder: https://www.banggood.com/custlink/Gm3KktUahw
Soldering Iron: https://www.banggood.com/custlink/mmGK2P2oKP
Soldering Tips: https://www.banggood.com/custlink/vGmKMtqjGO
Tweezers: https://www.banggood.com/custlink/mGvvqtMLm7
Solder: Loctite 60/40 0.5mm
Solder wick: https://www.banggood.com/custlink/K33mqFMOEn
Flux: https://www.banggood.com/custlink/mGGDkHUjYp
PS: Better Hot Air Station: https://www.banggood.com/custlink/KDKm7h6gdo

My Patreon: https://www.patreon.com/LivyuFPV

Thank you!

#electronics #repair #reflow

Видео The #1 Flight Controller Failure ? канала Livyu FPV