R/C Garbage Truck Packing!
The Norba RL35 model performing three compaction cycles, then driving away.
Havn't made any big progress since my last videos. The main difference is that some of the lights are working. Left to build is the container hoist system, and new side panels for the container. Hopefully that will be finished within a few months,, hopefully! ;-)
Most of my components were bought at:
www.fechtner-modellbau.de
They have a lot of good stuff!
-Cab, chassis, wheels, tyres, suspension, front axle-
Wedico, www.wedico.de
Alternative Cabs:
Bruder Arocs: www.bruder.de
Scale-art MAN TGS or Arocs: www.scaleart.de
-Drive Unit-
Motor: Servonaut GM32U450: www.servonaut.de
Cardan shafts: Fechtner modellbau.
Rear Axles: http://www.ruest-feinmechanik.de (Out of business?)
-Hydraulics-
Pump, cylinders, valves, filters, hoses, connections:
www.leimbach-modellbau.de/
I run my system at 15bar. Ø7mm cylinders for tailgate lift, all other cylinders Ø12mm. Pump article nr. H0102.
-Electronics-
Transmitter: Futaba FC-16 Boat 'n' Truck (Not available anymore)
2.4GHz conversion: FrSky: https://hobbyking.com/
Reciever: Frsky 8 channel: https://hobbyking.com/
Speed controller: Servonaut S22: www.servonaut.de
Winch speed controller: CTI Thor4s: www.cti-modellbau.de
Pump Switch: Futaba, but I would recommend using a single direction speed controller instead.
Winch Motor: PGM12L, Fechtner modellbau.
-Bodywork-
Container Floor, Sides and Roof: 3mm aluminium plate (watercut)
and various aluminium U- and L-beams. Machined and/or cut manually.
Container crossbeams: Aluminium beams 6x10mm and 6x20mm.
Ejector Plate: 1mm steel plate (laser cut), and 6x10mm aluminium crossbeams.
Tailgate Sides: 1mm steel plate (laser cut), and 5mm aluminium plates (water cut and machined).
Tailgate Crossbeams: Various sizes of aluminium beams, machined.
Packer Plate: 12, 5 and 3mm aluminium plates. (Water cut and machined)
Slide Plate: 3mm aluminium plate (watercut) and 10mm aluminium plate (watercut and machined).
For additional info; just ask.
Видео R/C Garbage Truck Packing! канала SeRefuseTrucks
Havn't made any big progress since my last videos. The main difference is that some of the lights are working. Left to build is the container hoist system, and new side panels for the container. Hopefully that will be finished within a few months,, hopefully! ;-)
Most of my components were bought at:
www.fechtner-modellbau.de
They have a lot of good stuff!
-Cab, chassis, wheels, tyres, suspension, front axle-
Wedico, www.wedico.de
Alternative Cabs:
Bruder Arocs: www.bruder.de
Scale-art MAN TGS or Arocs: www.scaleart.de
-Drive Unit-
Motor: Servonaut GM32U450: www.servonaut.de
Cardan shafts: Fechtner modellbau.
Rear Axles: http://www.ruest-feinmechanik.de (Out of business?)
-Hydraulics-
Pump, cylinders, valves, filters, hoses, connections:
www.leimbach-modellbau.de/
I run my system at 15bar. Ø7mm cylinders for tailgate lift, all other cylinders Ø12mm. Pump article nr. H0102.
-Electronics-
Transmitter: Futaba FC-16 Boat 'n' Truck (Not available anymore)
2.4GHz conversion: FrSky: https://hobbyking.com/
Reciever: Frsky 8 channel: https://hobbyking.com/
Speed controller: Servonaut S22: www.servonaut.de
Winch speed controller: CTI Thor4s: www.cti-modellbau.de
Pump Switch: Futaba, but I would recommend using a single direction speed controller instead.
Winch Motor: PGM12L, Fechtner modellbau.
-Bodywork-
Container Floor, Sides and Roof: 3mm aluminium plate (watercut)
and various aluminium U- and L-beams. Machined and/or cut manually.
Container crossbeams: Aluminium beams 6x10mm and 6x20mm.
Ejector Plate: 1mm steel plate (laser cut), and 6x10mm aluminium crossbeams.
Tailgate Sides: 1mm steel plate (laser cut), and 5mm aluminium plates (water cut and machined).
Tailgate Crossbeams: Various sizes of aluminium beams, machined.
Packer Plate: 12, 5 and 3mm aluminium plates. (Water cut and machined)
Slide Plate: 3mm aluminium plate (watercut) and 10mm aluminium plate (watercut and machined).
For additional info; just ask.
Видео R/C Garbage Truck Packing! канала SeRefuseTrucks
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Garbage Trucks Toys Unboxing And Playing With Jelly Beans CknBruder 3560 scania garbage truck - play guide - incineratorSan Jose Greenwaste Collection - Leach 2RIII and CAT 914G Tractor In ActionRecycling - Part 1RC Garbage truck Crushing Red Bull can, video #1Garbage Trucks for Children with BLiPPi fan | Learn rubbish trucks | min min playtimeHow to make Garbage Truck - Amazing Truck ToysMini Garbage Day with First Gear Garbage TrucksGarbage Day...In Miniature!Mini Bin Mini Cart TipperRoman's Waste Management Toy Garbage Truck Play DayToys Learning Name and Sounds Police cars, Fire Truck ToyFirst Gear 1:34 Scale Custom Garbage Truck - Mack "R" Series w/ McNeilus Rear-LoadGarbage Trucks for Children with Blippi | Learn About RecyclingFirst Gear Trucks (READ DESCRIPTION!)Garbage Truck Videos for Children: Green Kawo Toy UNBOXING - Jack Jack Playing with Lego TrashAnother video showing more of the truck.Truck filled with Toy Vehicles for KidsGarbage Trucks: On Route, In Action!Garbage Day...In Miniature! II