How to make a square bowl on a lathe.

In this video Ronald Kanne (woodturner in the Netherlands) shows you how to make a square bowl on a lathe.
Camera by Lies geluk.

About Ronald Kanne

Ronald is a wood turner in the Netherlands. He makes commissioned work and his own free work. And every week turns out to be a little too short to get all the work done... He also runs a webshop for other wood turners. It's called: www.dehoutdraaierij.nl. This webshop is in Dutch, English and German. The website that contains his own work is called www.ronaldkanne.nl. You will also find these links in the video.

Tools used in this video:
Bowl gouge: https://dehoutdraaierij.nl/en/shop/search-by-brand/crown-en/scales-guts-16-mm-crown/
Roughing Gouge: https://dehoutdraaierij.nl/shop/beitels-en-gutsen/afruwgutsen/afruwguts-32mm-231w/
Parting tool: https://dehoutdraaierij.nl/en/shop/chisels-and-gouges/parting-tools/crown-246w-2/
Skew: https://dehoutdraaierij.nl/en/shop/search-by-brand/crown-en/flat-chisel-skew-32-mm-crown/
face shield: https://dehoutdraaierij.nl/en/shop/personal-protection/face-protection/
Stronghold chuck: https://dehoutdraaierij.nl/en/shop/search-by-brand/oneway-en/oneway-stronghold-2/
Dovetail jaws: https://dehoutdraaierij.nl/en/shop/jaws/stronghold-en-jaws/3221-2/

Видео How to make a square bowl on a lathe. канала ronald kanne