Webinar: Pump Curves and Pump Sizing
It is estimated that as many as 75% of industrial pumps are oversized and as a result pump systems are operated at far from optimal conditions.
This webinar is presented by Dr Martin Atkins, a Senior Chemical Engineer from the University of Waikato Energy Research Centre and addresses the reasons why so many industrial pumps are oversized and the impact this has on total life cycle costs. .
Видео Webinar: Pump Curves and Pump Sizing канала EECABUSINESS
This webinar is presented by Dr Martin Atkins, a Senior Chemical Engineer from the University of Waikato Energy Research Centre and addresses the reasons why so many industrial pumps are oversized and the impact this has on total life cycle costs. .
Видео Webinar: Pump Curves and Pump Sizing канала EECABUSINESS
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pump Chart Basics Explained - Pump curve HVACRUnderstanding How to Read Pump CurvesSelecting and Sizing Irrigation PumpsPumping Downhill is NOT so Easy!Centrifugal Pump Hydraulic Fundamentals | Webinar Session 1 | Siewert EquipmentFlow and Pressure in Pipes ExplainedTo VFD or not to VFD: Centrifugal pump flow controlHow to Size a Centrifugal PumpWebinar: Off-Design Operation of Pump SystemsWebinar: Fan Curves, Systems Curves and how they intersectPump Sizing & FrictionHydraulic Cylinder Circuit - Speed Control and IntensificationFluid Mechanics: Centrifugal Pump Characteristics (21 of 34)Pump operating pointWell pump sizingMikes Aquaponics - Introduction to Aquaponics and Mikes First System - Part 1Centrifugal Pump Basics - How centrifugal pumps work working principle hvacrHow to Size a Pump, Pipe and Control ValveHow to Read a Pump Curve: Simple ExplanationBasics of Pump Maintenance w/ TPC Online Webinar | TPC Training