Dual-Side Thread-Roller for hi-tensile studs| Videx VS-25-DS model for M-6 to M-16
The Videx VS-25-DS is a Double End, Magazine Feed Thread Roller with a Controlled Start system, designed for double end thread rolling of straight studs.
The controlled start assures better quality threads and lower die cost per piece.
The machine is equipped with quick-change features for both thread and length.
The machine can roll up to 90 PPM and the actual production rate depends on the operator’s capacity.
In case the machine is fed from an external header, Videx is supplying upon request an automatic level control in the magazine that can control the feed of parts into the VS-25-DS.
Видео Dual-Side Thread-Roller for hi-tensile studs| Videx VS-25-DS model for M-6 to M-16 канала Videx
The controlled start assures better quality threads and lower die cost per piece.
The machine is equipped with quick-change features for both thread and length.
The machine can roll up to 90 PPM and the actual production rate depends on the operator’s capacity.
In case the machine is fed from an external header, Videx is supplying upon request an automatic level control in the magazine that can control the feed of parts into the VS-25-DS.
Видео Dual-Side Thread-Roller for hi-tensile studs| Videx VS-25-DS model for M-6 to M-16 канала Videx
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
U-Bolt Bending machines; from straight studs; Servo-Driven, for short batches | Videx VBH modelsThreaded Rod line from Coil, M-6 to M-12, Dual-Side; 50 m/minute, Hi-Speed with optional BundlingAnchor Bolt machine; Thread & Bend, M-24/205mm thread length)| Videx VS-BH modelsSuper long stroke one die two blow hex bolt cold heading machineThreaded Rod line from Coil; M-6 to M-12, Dual side - 50 meters/minute; Factory visitDrehbar Profilbiegemaschinen , Turnable Section Roller , Vălţuitor de profile , ProfilhengerítőBTMs Manufacturing Mondays - Custom Manufacturer of U-Bolts, J-Bolts, Rods, Studs, Anchor BoltsThread Rolling Machine 3 Tons, by Thread Form Machine Industries, Hyderabad, Andhra Pradesh, IndiaTool Tuesday - 53" Wide Belt SanderVertical Thread Rolling Machine-Double End Threaded Rod 5/16"x200mmCNC Multi slide former CNC-16T1, speed 12000 PCS/HourThread Roller for straight studs; Single-side, M-5 to M-16U-bolt-info@komand-bg.comModel 740 Large Acme RollingU-Bolt machines from coil (General video) | Videx VAS line for U Bolts, Eye Bolts & Straight studsApplication of Annular Thru-feed Thread Rolling DiesShear Stud Connector - BOLTDEE _Hammer TestTesker 4840HS Thread Rolleru bolt bending machineautomatic U bolt making machine straightening and cutting threaded and bending in one machine