IoTT Boards Built from Scratch (Video#153)

In Video #151 I showed you step by step how you can build the IoTT boards based on preassembled PCB’s from JLCPCB. Today, we are going a step further and channel viewer Ben Perreau demonstrates how to build a PowerShield from a raw PC board, placing and soldering all components manually.

Easy, Affordable, and Reliable PCB manufacturing with JLCPCB! Register to get $60 New customer coupons: https://jlcpcb.com/?from=Iott

If you like my work, please consider supporting it with a donation:
https://www.paypal.com/biz/fund?id=Y27LH47B3W354

Github Repository for IoTT Boards: https://github.com/tanner87661

Tindie page for IoTT Stick, Interface Boards and Function Hats: https://www.tindie.com/stores/tanner87661/

MyIoTT.org (landing page under construction): http://myiott.org/

Electronoobs: JLCPCB solder paste stencil order and use https://www.youtube.com/watch?v=uXvXwzQf1gU

Storage boxes: https://www.thingiverse.com/thing:2684082
Ben's Booster base: https://www.thingiverse.com/benperr/designs

Table of Content
0:00 Start
0:33 Welcome
1:23 SMD vs thru hole
2:50 Project Introduction
4:10 Preparation
9:20 Component preparation
11:30 Applying Solder Paste
13:30 Useful Tools
14:20 Component Placement
17:45 Soldering
22:35 Visual Inspection and SMD Debugging
25:00 soldering Thru Hole Components
25:25 Test Layout
29:43 Conclusions and Outlook

Видео IoTT Boards Built from Scratch (Video#153) канала IoTT