ROYAL MASTER CENTERLESS GRINDER

More info on our website:
http://www.machineryvalues.com/xdetails.cfm/QN/159050

ROYAL MASTER MODEL TG-12 X 4 SERVO CYCLE
THIS MACHINE IS SET UP FOR BOTH INFEED & THRUFEED GRINDING OPERATIONS
SERIAL NUMBER #3071 NEW: 2014
SERVO MOTOR REGULATING WHEEL DRIVE
IN-LINE BALL SCREW AND NUT
TOUCH SCREEN CONTROL, EASY TO NAVIGATE INFEED SET UP (SEE FURTHER DESCRIPTION BELOW)
WITH ONE TOUCH RPM CHANGE
TACHOMETER
COOLANT TANK PUMP AND MOTOR, WITH SOCK FILTRATION SYSTEM
110 VOLT MAGNETIC CONTROLS WITH OVERLOAD PROTECTION
PRECISION REGULATING WHEEL HOUSING
HYDRAULIC TANK & SYSTEM WITH LEESON MOTOR, LOCATED INSIDE MACHINE BASE
AUTOMATIC LUBRICATOR, RAM BED
4" WORK WHEEL AIR SENSING DRESSER
4" REGULATING WHEEL AIR SENSING DRESSER
INFEED & THRUFEED WORK REST HOLDERS
WORK REST BLADES
PART EJECTOR
OUTBAORD ROD SUPPORT
SA-151 - LATERAL ADJUST 4" RW ASSY.
ALLOWS FOR FAST ALIGNMENT OF THE REGULATING WHEEL FORM TO THE WORK WHEEL FORM.
SA-94-SM FRAMELESS SERVO DRIVEN IN-LINE BALL SCREW AND NUT.
TOUCH SCREEN CONTROL WITH EASY TO NAVIGATE INFEED SET UP
A)THRUFEED CONTROLS
B)INFEED CYCLE – INCLUDES THE FOLLOWING SEQUENCE:
1. LOAD PART, PRESS CYCLE START
2. RAPID TO GRIND
3. GRIND
4. CREEP FEED
5. DWELL
6. RAPID RETRACT
7. DWELL IN OPEN POSITION
8. RAPID TO LOAD POSITION
THE INFEED CYCLE CAN BE OPERATED SINGLE CYCLE OR REPEAT CYCLE
C) 2" OF RAM TRAVEL ALLOWING FOR REMOVAL OF GRINDING WHEEL WITHOUT MANUALLY RETRACTING THE RAM.
D) SAVE INFEED GRIND PARAMETERS WITH UNIQUE FILE NAMES
E) SINGLE STEP FOR INFEED CYCLE SET-UPS
F) OPERATOR INTERFACE WITH CALCULATOR INPUTS
G) ENGLISH OR METRIC UNITS
H) AUTOMATIC INSERT BLADE SIZING
I) DIGITAL READOUT OF RAM POSITION
MACHINE IS WIRED PRESENTLY FOR 3/60/208 VOLTS
COMES WITH OTHER ACCESSORIES AS SHOWN IN THE PHOTOS
** LIKE NEW CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

Видео ROYAL MASTER CENTERLESS GRINDER канала MachineryValues Inc