Squarebody 2” Drop Spring Install

#squarebody #c10 #c10nation
I installed lowering 2 inch lowering springs on my 1987 c10. I remove as little parts as possible to get the spring out and back in. I used moog 6454 coil springs they are stock height for a 3/4 ton pickup. I cut 1 full coil off and heated a small portion of the spring to make it set correctly in the lower control arm pocket.

Moog 3/4 ton springs

Moog 6454 Coil Spring Set https://www.amazon.com/dp/B000L9Q51I?ref=ppx_pop_mob_ap_share

3” drop springs

GMC Chevy C10 1965-1987 3" Drop Coils Springs Kit Lowering https://www.amazon.com/dp/B07P51J6D8/ref=cm_sw_r_cp_api_i_GfEOFb80T6WBS

2” drop springs

GMC Chevy C10 1965-1987 2" Drop Coils Springs Kit Lowering https://www.amazon.com/dp/B07P3XJB36/ref=cm_sw_r_cp_api_i_1fEOFb5YXQFRW

3” drop spindles

QSA 3" Lowering Drop Spindles. Compatible with 1973-1987 Chevrolet GMC C10 C1500 (1.25" Thick Rotor ONLY) 2WD - MUST measure Rotor Thickness before purchasing!! https://www.amazon.com/dp/B00LPTL6EO/ref=cm_sw_r_cp_api_i_ngEOFbX2XQ0PG

2.5” drop spindles

WULF 2.5" Front Drop Spindle Lowering Kit For 1973-1987 CHEVY C10 GMC C15 2WD with the 1" Thick Brake Rotor https://www.amazon.com/dp/B07XYH26LS/ref=cm_sw_r_cp_api_i_WgEOFbR3EYN4Q

Видео Squarebody 2” Drop Spring Install канала 3rd Gen C10’s