5-Axis CNC Programming: Getting Smooth Moves on HAAS UMC-750 with Fusion 360!

One of the great things about 5-Axis CNC machining is the ability to use a shorter tool to machine areas of a part that would otherwise require tools too long or too small in diameter! Using 3D Contour in Fusion 360 with shaft and holder detection, we can program a "simple" 3-axis feature but have Fusion automatically convert that 3-axis toolpath into a simultaneous 5-axis toolpath to ensure the tool and tool holder clear the part!

We did not like the jerking/stuttering motion in the linking/height retract moves but, thanks to Laurens Wijnschenk from 3D Tech Draw, we were able to get a nice, smooth tool path!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video

NEW 5-Axis Hands-On Training Class | http://bit.ly/2mFW8K0

Better Speeds & Feeds? http://bit.ly/2nibbKl

V8 Engine Block | http://bit.ly/2N6Kb72

3D Tech Draw SHOP TOUR | http://bit.ly/2m2On09

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:

Manufacturing Entrepreneurship Resources:
http://www.nyccnc.com

Online Fusion 360 Training: http://bit.ly/LearnFusion

Hands-On CNC Classes: http://www.nyccnc.com/events

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I discovered machining as an adult and am grateful to have found something I love and can share with others. We hope NYC CNC not only makes you a better machinist but helps you understand and learn more about how to succeed as a manufacturing entrepreneur! 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH

Видео 5-Axis CNC Programming: Getting Smooth Moves on HAAS UMC-750 with Fusion 360! канала NYC CNC