4 Rotor AWD FD RX7 | Rob Dahms 1000HP+ Quad Rotor Build [TECH TALK]
An AWD RX7 is exciting in itself, but a Quad-Rotor build as well, that was too much for Andre to not take a look during his latest SEMA trip.
If you haven’t heard of Rob Dahm and his Mazda FD RX7 build, you have now. This has been 5 years in the making so far with lots of ups and downs as well as plan changes along the way, but at SEMA Rob presented a running car so we’re excited to so hopefully see it out and about in 2020.
Brotherly rivalry led Rob to consider an AWD/4WD build and with support and encouragement from Ian Steward of ASD Motorsports which built Ken Blocks Gymkhana 7 ‘Hoonicorn’ AWD Mustang. A lot of the details of the Hoonicorn build were shared with Rob, but in the end, it wasn’t compatible with this application particularly when it came to fitting a passenger seat.
Due to concerns with cast components, Rob sourced a billet 4 rotor from Carl Thompson which was the spare for a build of his we have featured previously (linked below). It has some unique features which we’re excited to learn more about as time goes on and A-B testing is planned in relation to tuning and exhaust components in the near future too.
The car runs an R32 GTR transfer box off the back of a Holinger RD6, Winters Quick Change rear differential, Adaptronic M6000 ECU, Garrett 106mm turbo, Clearview oil filtration system along with Ti Automotive a dual brushless pump setup.
Also discussed are the reasons for the tube frame in relation to requirement, or just preference, cast vs billet 4 rotor setups and what the plan is from here.
Want to learn how to tune EFI? Start here instantly, and for free: http://bit.ly/EngineTuningFree
Carl Thompsons 4 Rotor: https://youtu.be/OyLgaSwr5LA
Website: https://www.hpacademy.com
Contact: support@hpacademy.com
Merch shop: http://bit.ly/MerchHPA
#highperformanceacademy #learntotune #robdahm #quadrotor #awdrx7 #semashow
Видео 4 Rotor AWD FD RX7 | Rob Dahms 1000HP+ Quad Rotor Build [TECH TALK] канала High Performance Academy
If you haven’t heard of Rob Dahm and his Mazda FD RX7 build, you have now. This has been 5 years in the making so far with lots of ups and downs as well as plan changes along the way, but at SEMA Rob presented a running car so we’re excited to so hopefully see it out and about in 2020.
Brotherly rivalry led Rob to consider an AWD/4WD build and with support and encouragement from Ian Steward of ASD Motorsports which built Ken Blocks Gymkhana 7 ‘Hoonicorn’ AWD Mustang. A lot of the details of the Hoonicorn build were shared with Rob, but in the end, it wasn’t compatible with this application particularly when it came to fitting a passenger seat.
Due to concerns with cast components, Rob sourced a billet 4 rotor from Carl Thompson which was the spare for a build of his we have featured previously (linked below). It has some unique features which we’re excited to learn more about as time goes on and A-B testing is planned in relation to tuning and exhaust components in the near future too.
The car runs an R32 GTR transfer box off the back of a Holinger RD6, Winters Quick Change rear differential, Adaptronic M6000 ECU, Garrett 106mm turbo, Clearview oil filtration system along with Ti Automotive a dual brushless pump setup.
Also discussed are the reasons for the tube frame in relation to requirement, or just preference, cast vs billet 4 rotor setups and what the plan is from here.
Want to learn how to tune EFI? Start here instantly, and for free: http://bit.ly/EngineTuningFree
Carl Thompsons 4 Rotor: https://youtu.be/OyLgaSwr5LA
Website: https://www.hpacademy.com
Contact: support@hpacademy.com
Merch shop: http://bit.ly/MerchHPA
#highperformanceacademy #learntotune #robdahm #quadrotor #awdrx7 #semashow
Видео 4 Rotor AWD FD RX7 | Rob Dahms 1000HP+ Quad Rotor Build [TECH TALK] канала High Performance Academy
Показать
Комментарии отсутствуют
Информация о видео
25 февраля 2020 г. 3:16:10
00:17:21
Другие видео канала
AWD 4 Rotor hits the DYNO! Maxed out Injectors!I almost pull a WHEELIE in the 3 Rotor RX-7. Its violent.Is this how to Properly Build a GTR?! - Slip Angle SpotlightBuilding A 5 Second, 3000HP 2JZ Drag Car | Yuasa Pro Mod Camry [TECH TOUR]Proline Racing's 5200HP Hemi V8 | Secrets Revealed [TECH TALK]The AWD 4 Rotor RX-7 is coming home to Michigan! Probably going to be the loudest car on trackThe Best FC RX-7 Widebody Kit Ever? The Pandem/Greddy RX-7 is an IMSA/Group B MashupThis 28L Airbox Setup Is GENIUS - Nismo's GT300 Z33UNLIMITED BUDGET, 3500hp Twin Turbo vs Supercharger dyno showdown!Our FD RX7 Project | Ep 1 [OFF THE RECORD]Stock To 1200hp+ 54psi & 208mph | Honda B18C [TECH TALK]3000HP, 150 PSI Of Boost | What Do YOU Know About Compound Turbo Systems | Shane T [TECH TALK]First AWD RX-7 Test Drive. Wheels finally spin the same speed.What is a BILLET ENGINE, and when should you get one? vs cast 2JZ: Bullet Race Engineering Tour.No LS Swaps Here! | 13B Powered RX7 510WHP From 1.3L [TECH TOUR]10,500 RPM, 670HP rotary engine...without a turbo! | 3 Rotor 20B FD RX7 Time Attack car [TECH TOUR]Everything WRONG with the AWD 4 Rotor RX-7 at Sevenstock and SEMA.1000HP+ 53PSI COBB Tuned Subaru WRX | Airstrip Attack [TECH TALK]3300HP Street Car, World’s FASTEST | Larry Larson [TECH TALK]