Making Scope Rings for the Browning A Bolt 3 - Part Three
Trial fitting and starting the contours.
http://tomstechniques.com/wp-content/uploads/2016/01/Scope_Mount_-_Clamp_Ring_Drawing_1.pdf
http://tomstechniques.com/wp-content/uploads/2016/01/Scope_Mount_-_Base_Ring_Drawing_2.pdf
Видео Making Scope Rings for the Browning A Bolt 3 - Part Three канала Toms Techniques
http://tomstechniques.com/wp-content/uploads/2016/01/Scope_Mount_-_Clamp_Ring_Drawing_1.pdf
http://tomstechniques.com/wp-content/uploads/2016/01/Scope_Mount_-_Base_Ring_Drawing_2.pdf
Видео Making Scope Rings for the Browning A Bolt 3 - Part Three канала Toms Techniques
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The New Toms Techniques Shop
Tom's Tips & Tricks #3 - Plunge Milling
Tom's Tips and Tricks #2 - Power Feed for the Compound Rest
Tom's Tips & Tricks #1 - Quick Part Alignment on the Lathe
Clamp Knurling Tool, Case Hardening the Steel Parts
Making Scope Rings for the Browning A Bolt 3 - Part Four
Making Scope Rings for the Browning A Bolt 3 - Part Two
Making Scope Rings for the Browning A Bolt 3 - Part One
Climb Milling vs. Conventional Milling
Red Hardness
Clamp Knurling Tool, Mounting Bracket and Back Plate, Part Two
Clamp Knurling Tool, Mounting Bracket, Part One
Clamp Knurling Tool Body, Drilling, Tapping and Counter-Boring the Holes
Clamp Knurling Tool, Body, Four Ways to Machine the Outer Contour
Clamp Knurling Tool Body, Milling the Slot
Clamp Knurling Tool, Body, Squaring the Stock and Boring the Center Hole
Clamp Knurling Tool Body, Introduction
Clamp Knurling Tool, Knurl Holder Part 1, Squaring the Stock
Clamp Knurling Tool, Knurl Holder Part 2, Milling the Slot and Chamfer and Reaming the Pin Hole
Clamp Knurling Tool, Introduction