|J4TM| ⭐ Ep. 6 - Homage watch bezels - Remove & replace tutorial + extra info ⭐ | ⌚The Watcher ⌚

Ep 6 - Homage watch bezels, info plus remove & replace tutorial

I made this video due to a subscriber being in a bit of a dilemma with regards on how to put a bezel back together.
The bezels used in the Homage game are somewhat different to the one's used in Seiko's and therefore require a different method of assembly.

- Main components : Centre bezel retention wire & tension wire

- All bezels are not created equally
Most chinese manufacturers use a lower quality of steel to produce the bezel, while the case is 316L the bezels can be up to 2 grades below. They also vary in thickness which means some should not be messed with or require very experienced hands

- Pro's and con's versus Seiko
Pro -Very good alignment and rotational feel (if its done right) with 0 playback for the most part along with consistent rotational feedback
Con - Quite flimsy and very very fiddly to get back on

I hope you enjoy the video , hit that subscribe button!

#J4TM #seikomod #heimdallelrmod #proximamod #homagewatches #seikomods #modyourwatch #watchmod #thewatcher

Видео |J4TM| ⭐ Ep. 6 - Homage watch bezels - Remove & replace tutorial + extra info ⭐ | ⌚The Watcher ⌚ канала Just 4the Modderz