DD15 major overhaul Part 6, cylinder head bolt installation and how to torque
Part 6 in our series of the DD15 major overhaul, this video goes over the cylinder head bolt installation and how to torque properly.
Cylinder head bolt torque specs:
Step 1, 147 lbs ft
Step 2, 90 degree torque turn
Step 3, 90 degree torque turn
DO NOT USE A IMPACT TO REACH THE 90 DEGREE TORQUE TURN, THIS MUST BE DONE USING A WRENCH.
Видео DD15 major overhaul Part 6, cylinder head bolt installation and how to torque канала Pedro Fuentes
Cylinder head bolt torque specs:
Step 1, 147 lbs ft
Step 2, 90 degree torque turn
Step 3, 90 degree torque turn
DO NOT USE A IMPACT TO REACH THE 90 DEGREE TORQUE TURN, THIS MUST BE DONE USING A WRENCH.
Видео DD15 major overhaul Part 6, cylinder head bolt installation and how to torque канала Pedro Fuentes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Simple way to upgrade your fog lights and keep your truck looking good. DIY
DD13 con bomba de alta presión dañado, estos son unos de las señales y que ay que buscar. Parte 1
Get ready for summer before it’s too late.
Constantly having to adjust valves? what to look for, head bolt removal w/ Milwaukee impact review
DD13 DOC fault code temp error
Another DD13 with a bad fuel pump only 350,739 miles
New year, new batteries. Recommend to replace all 4. Don’t be afraid to write date of installation.
Just replaced the cylinder head and it came back. Part 2
Caught just in time, well it came back but gives us an opportunity to fix other things. Part 2
What’s going on in the shop? Quick glimpse , maintenance, truck repairs and prepping
Cascadia with a VSS fault code, SPN 84 FMI 4. Not what you think
Just a quick message, Merry Christmas and Happy New Year from Carlos Diesel Electric
Parked regen ran over 1 hour then aborts. What to look for, how to DIY and get back on the road.
DIY changing your fuel water separator, Cascadia
Thank you for a watching, Merry Christmas
Kenworth T370 with just 62,401 miles. Bad turbo, engine issues and other problems
Maintenance: Don’t forget about your air filter. Take care of that truck.
Can we bring this DD15 back from zero compression? This is why valve adjustments are important.
Getting your truck road ready, new truck and a fresh start.
Broken socket (plug), replace this and not the entire harness. Save time & money #kenworth #T680
How to calibrate the turbo actuator once you have replaced your Cummins turbo. This is a must