Arduino Stabilized Model Rocket
Three launches and a description of how it works. I documented very little of this project. Inside the top section is an Arduino Nano 3.0, with a 10-dof breakout board from Hobbyking, 3 sub-micro 2.9g servos, a 5v regulator (BEC) and a 2p 120mah LiPo. The parachute did not work for any of the launches.
Видео Arduino Stabilized Model Rocket канала JiveFowl
Видео Arduino Stabilized Model Rocket канала JiveFowl
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Rocket StabilityDIY Javelin Guided missile Part1Successful launch of TVC self stabilized rocketYou can learn Arduino in 15 minutes.Flight Software Setup - Landing Model Rockets Ep. 8RC Airplane Homemade Autopilot (Arduino - PID control)The DIY Rocketeer Building SpaceX Replicas of Self-Landing RocketsHow to INCREASE the power of your SUGAR rocket (Kno3+Sugar+Fe2O3)Super Capacitor RocketRedneck RocketrySilo-Launched Model Rocket - Thoomp Flight 1How To Build A Rocket (From Scratch)Scout E - Flight 1 Launch + LandingArduino active rocket stabilization system update mid 2016How To Make Simple RC Airplane For Simple Radio Control. DIY RC Aiplane & Arduino RCThrust Vectoring Mount - Build Signal R2FLYING COKE powered airplaneHow To Make "Screw-Lock" Sugar RocketsMaking a Powerful 2-Stage RocketArduino in Near Space. 27000 metres above the surface.