Rescue Picket Anchor Plate Pull Test
Gear test of the Rescue 3 Picket Anchor Plate. We wanted to see how this simple piece of gear performed with direct read instrumentation. Drive in 3 forty inch pickets and connect your system. Thats it. This simple setup took 6006 pounds force and did not look the least bit troubled. This is a pass!
Видео Rescue Picket Anchor Plate Pull Test канала DRR Rescue
Видео Rescue Picket Anchor Plate Pull Test канала DRR Rescue
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Portable Anchor Pickets (1:1:1)
DIY Off-Road Pull-Pal/Land Anchor testing and mods. Get unstuck !!!
picket anchors
9 ways to rig a 4x4 winch using 1 snatch block
Hi-Lift Winch and Rebar Ground Anchor Experiment
All-TIE Anchor pulls truck out - - Winching with NO Truck just portable winch anchor point
Picket Anchor System 1-1-1 configuration
Made 4 Winch Gets Your ATV Unstuck!
Picket Anchor System, Rope Rescue
Rope Portable Anchors Picketts
SPADE anchor - UNBELIEVABLE holding power !
Caught without any recovery gear!!
No Trees to Winch? How to Make a DIY Ground Anchor or Earth Anchor
Deadman Instructions: Ground Anchor
Sand Anchor Test Pull Pal vs. Lan-Cor
Best Rope Rescue Anchor Systems - How to Rig/Setup
Maxtrax as a Sand Anchor? 4x4 Self Recovery Technique | Part 1
How to Turn a RATCHET STRAP into a WINCH!
Recovery of two vehicles using #PullPall ground #anchor, #winch and #Bubba rope #PortableRescueTree
Hurley Picket Anchor System