Squarebody Cross Over Steering (1987 K5)

Welcome to another episode of Wolf Wagon Garage, Today we will show you how to do crossover steering on your square-body! This is now EASILY my favorite mod I've done to the rig & with all the proper parts, this can be a day/weekend project easily! *NOTE* It is not necessary to pull the differential cover and pull the center pin to remove the axles shafts.

Parts list:
•ORD crossover kit: https://www.offroaddesign.com/chevy-dana-44-crossover-steering.html
Yes, in the video i did call it a spindle nut but *I FOUND*
•Pitman arm nut: https://www.offroaddesign.com/nut-and-lock-washer-for-saginaw-sector-shaft.html
•Ried racing knuckle (optional route): https://www.offroaddesign.com/catalog/product/view/id/1628/s/reid-racing-dana-44-and-10-bolt-knuckles/
•REDHEAD steering box (18 to 1 ratio): https://redheadsteeringgears.com/product/2856-4t/?fbclid=IwAR1t2VldSIaPxC6e4Z8BKPVcBqtqd36KExqFIZ8FeaqTEizLi0NQkl8mfckcontent/uploads/2017/11/2856-4T.jpg
*Dont forget to source all your stock replacement parts! Ball joints, tie rods, etc!*

-Music Credit:
Song: YANQRA - Elation
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: https://youtu.be/3L6QNGJQhbI

Song: MusicbyAden - Happy
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: https://youtu.be/J4GpNOmYlEk

Song: MusicbyAden - Me & You
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: https://youtu.be/fe_IYvhqQK8

Видео Squarebody Cross Over Steering (1987 K5) канала Wolf Wagon Adventures