External Threading - A Beginners Guide
How to grind an Acme threading tool. How to cut 60 degree left hand and right hand threads. How to cut acme threads.
Видео External Threading - A Beginners Guide канала Halligan142
Видео External Threading - A Beginners Guide канала Halligan142
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to cut a thread on a manual lathe (Intermediate method ideal for home workshop & hobby engineer)](https://i.ytimg.com/vi/wvYQdi68074/default.jpg)
![Get your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!](https://i.ytimg.com/vi/gCUkJydSmdA/default.jpg)
![9" South Bend Junior Lathe Change Gears](https://i.ytimg.com/vi/yaMijdzdz6M/default.jpg)
![Lathe Compound Setup for Single Point Threading...Myths and Musts](https://i.ytimg.com/vi/PnH_oeOUps4/default.jpg)
![You will throw your die handles away after you watch this !!!](https://i.ytimg.com/vi/gIQdxMRqjLA/default.jpg)
![Machining a Custom Prop Shaft Part 1](https://i.ytimg.com/vi/kKrdJdpx33M/default.jpg)
![Thread cutting WITHOUT setting the compound slide at an angle!](https://i.ytimg.com/vi/pCOk71_IS7M/default.jpg)
![LATHE SETUP](https://i.ytimg.com/vi/SOnPEwP9bCA/default.jpg)
![Another Thread Cutting Video?!](https://i.ytimg.com/vi/Lb_BURLuI70/default.jpg)
![SHOP TIPS #182 Threading on the Clausing Lathe Using a Pre-Ground Tool tubalcain](https://i.ytimg.com/vi/h-Eiasc0Qc8/default.jpg)
![Thread Depth, Tool Tip Width and Length of Cut NO TRIG NEEDED](https://i.ytimg.com/vi/nLHXSXzQP3U/default.jpg)
![7 Mods and Improvements for a Metal Lathe](https://i.ytimg.com/vi/Y3N5k4rmf9o/default.jpg)
![How to Cut a Fine Thread on a Lathe (Training Film)](https://i.ytimg.com/vi/90EuSPWkLrY/default.jpg)
![Threading on a manual lathe BEST TECHNIQUE EVER !!!!](https://i.ytimg.com/vi/Z-dqOi_z5bk/default.jpg)
![Easy To Make Quality Machine Die Holders For Use On Lathe And Bench](https://i.ytimg.com/vi/c87Qansg6KI/default.jpg)
![Single Point Threading on the Lathe I](https://i.ytimg.com/vi/nCZFmuYnotQ/default.jpg)
![SNS 210: Acme Nut Threading](https://i.ytimg.com/vi/CFWwNpSDHKM/default.jpg)
![A Brief Chat about Carbide Tooling](https://i.ytimg.com/vi/rsFFWYo8ugw/default.jpg)
![Knurling and a Few Things you Should Know](https://i.ytimg.com/vi/9Zwi0ZAUCUc/default.jpg)
![Grinding HSS Tools](https://i.ytimg.com/vi/__A2xtLF0AU/default.jpg)