Jet-Surfboard Fast DIY

Getting to grips with the board's grunty power,
I did not do very well at the start as the throttle
only needed the slightest touch to put the boards nose up
when starting off,, It's set on medium acceleration at the moment
and at a low motor timing so there are settings that can be done
to smooth the start out and put some more top end speed on,
I was running on 9s but only on 9000mah capacity batteries, so full voltage speed tests have still to be done with a bigger battery pack,, my batteries did get hot so I will be running with a minimum
of 1300mAh batteries to keep the heat down and not to stress the batteries too much,, also I will probable swap the 8awg wire from the batteries to esc to something a big bigger but I'm not in a rush for that,,, everything else ran great and I feel like I've got a runner :)
I've been off-line for a bit while I've been sorting things out,
and will be in touch with emails very soon,
also I'll do a video of the bits I'm using and links to where to get them from.
Hope all is well and Thanks for all the support Mates
All the best and Cheers
Mark

Видео Jet-Surfboard Fast DIY канала YOUNGSTERS JETS