How to square Log barstool legs to sit flat on the floor
In this video I show you my cheap and effective method of cutting the bottoms of the legs on my log bar stools I build, Doing this makes them much more stable to sit in and looks a lot better than leaving them with a cut made at 90 degrees to the log itself which leaves only the inside corner of each Log touching the floor.
These bar stools are not done, yes I know there's glue to clean off and yes I know that the tenons connecting to the bottom of the seat are quite long and do not look right.
Hope this helps someone at some point.
Like and Subscribe. Thanks.
Видео How to square Log barstool legs to sit flat on the floor канала TimberKraft
These bar stools are not done, yes I know there's glue to clean off and yes I know that the tenons connecting to the bottom of the seat are quite long and do not look right.
Hope this helps someone at some point.
Like and Subscribe. Thanks.
Видео How to square Log barstool legs to sit flat on the floor канала TimberKraft
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
He felt it soon after. #oc #spray #sabre #red #pepper #spray #amusementSeems like I'm always finding more uses for the forks on the tractor. #tym #tractor #tractorvideoLeaving Jamaica #cruise #cruiseship #vacation #norwegianfinishing up the stripes. #cnc #cncmachine #stars #stripes #thin #blue #lineWhy You Should Keep Your Tenon Cutters Sharp!!!Time Lapse Of Applying a Weathered Finish To New Adirondack Style ChairsLearn to Measure, Mark and Drill For Log FurnitureAssembly tip for log furniture3yr old teaches how to use a drillBest Advice When Moving Your Manual Sawmill.Woodland Mills HM126 Sawmill Site Setup Pt1 The Plan9 Year old driving a brand new XMR 570. #canam #xmr #570 #2022 #outlander #responsibility #funWoodland Mills HM126 Sawmill Site Setup Pt3 Moving The TrackHe could go round and round for hours. Honda Trx90Clip & Carry Kydex Sheath Gerber MP600 Initial Reviewdumped him at the end.SS Katahdin. Greenville Maine. #maineTraded A Log Bed Check Out What I GotLumberjack Tools 10" Drawknife & 1.5" Tenon Cutter Unboxing and First Thoughts.No Tenon Cutter? Try This To Cut Quality Tenons With Just A Drill Bit and Draw Knife