SI 4732 receiver update
An update on my Chinese SI4732 receiver. I have had some helpful advice on this and have improved it to an extent but still no SSB.
My advice would be to treat these radios as a basis for experimentation as quality control is clearly an issue.
PU2CLR 4735 Ardunio stuff is here: https://github.com/pu2clr/SI4735
Видео SI 4732 receiver update канала Kevin O'Reilly
My advice would be to treat these radios as a basis for experimentation as quality control is clearly an issue.
PU2CLR 4735 Ardunio stuff is here: https://github.com/pu2clr/SI4735
Видео SI 4732 receiver update канала Kevin O'Reilly
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Ham Radio - The Malahit DSP portable SDR receiver.
Another Update for the SI4732
SI 4732 A look inside
Second SI 4732 arrives
Fixing the SSB function on my SI4732
SI4732 All Band Radio Receiver FM AM (MW And SW) SSB (LSB And USB)
SI 4732- Can I receive medium and Longwave on the telescopic antenna?
SSB working on my SI4732
Upgrading the SI4732 with better display and 9khz steps
Prepper Radios: SI4732 All Band Shortwave Radio!
KIT ST4732 from China (Firmware Update)
Pocket ALL BAND/ALL MODE SDR receiver (Malachite clone)
Si4732 Radio Sketch Updates 2.3.09
KN-990 SDR All Mode HF Transceiver With IF DSP 0.1 - 30 MHz
SI4732 V7 Update
SI 4732 Firmware comparison
si4732 and the ic705 listening to a music pirate on 6665khz
MLA 30 Active Shortwave Loop Antenna And Build
SI4732 Further update
Malachite clone & RX improvement on Telescopic antenna