Everything you need to start | STM32 development on Linux | VIDEO 1
In this video I go over everything you need to start working on stm32 on Linux. All useful link are down below. For any question just submit a comment.
stlink is now under repository of stlink-org. Some changes in development might happen. To compile stlink on your machine, run make in root folder of the project. Compiled binaries will be places in ./build/Release/bin and libraries will be placed in ./build/Release/lib.
ARM-GCC: https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads
STM Firmware: https://www.st.com/en/embedded-software/stm32-standard-peripheral-library-expansion.html?querycriteria=productId=LN1734
ST-LINK: https://github.com/stlink-org/stlink
Project code:https://github.com/prtzl/Embedded_videos/tree/master/001_FirstSetup
Видео Everything you need to start | STM32 development on Linux | VIDEO 1 канала Matej Blagšič
stlink is now under repository of stlink-org. Some changes in development might happen. To compile stlink on your machine, run make in root folder of the project. Compiled binaries will be places in ./build/Release/bin and libraries will be placed in ./build/Release/lib.
ARM-GCC: https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads
STM Firmware: https://www.st.com/en/embedded-software/stm32-standard-peripheral-library-expansion.html?querycriteria=productId=LN1734
ST-LINK: https://github.com/stlink-org/stlink
Project code:https://github.com/prtzl/Embedded_videos/tree/master/001_FirstSetup
Видео Everything you need to start | STM32 development on Linux | VIDEO 1 канала Matej Blagšič
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![STM32 Guide #1: Your first STM32 dev board](https://i.ytimg.com/vi/rfBeq-Fu0hc/default.jpg)
![Basics of GPIO | STM32 development on Linux | VIDEO 2](https://i.ytimg.com/vi/IE2PpYzsa9M/default.jpg)
![GNU Toolchain setup for STM32 inside Linux and using Makefile for build and flash | No IDE | LESWG](https://i.ytimg.com/vi/imUiQkO9YHM/default.jpg)
![Introduction to Embedded Linux Part 1 - Buildroot | Digi-Key Electronics](https://i.ytimg.com/vi/9vsu67uMcko/default.jpg)
![Install pre-compiled ARM cross-compiler onto Ubuntu Linux.](https://i.ytimg.com/vi/gm7lEJS3IuY/default.jpg)
![C Programming Tutorial 7 - Intro to UNIX/Linux - Part 2](https://i.ytimg.com/vi/2sAqu2VoJCQ/default.jpg)
![Debugging STM32 in VSCODE with stlink and jlink | VIDEO 45](https://i.ytimg.com/vi/g2Kf6RbdrIs/default.jpg)
![How Do Linux Kernel Drivers Work? - Learning Resource](https://i.ytimg.com/vi/juGNPLdjLH4/default.jpg)
![you need to learn Virtual Machines RIGHT NOW!! (Kali Linux VM, Ubuntu, Windows)](https://i.ytimg.com/vi/wX75Z-4MEoM/default.jpg)
![Getting Started with STM32 and Nucleo Part 1: Introduction to STM32CubeIDE and Blinky – Digi-Key](https://i.ytimg.com/vi/hyZS2p1tW-g/default.jpg)
![STM32CubeIDE basics - 03 GPIO HAL lab](https://i.ytimg.com/vi/Azr5vjbgACM/default.jpg)
![Embedded Rust: PWM signal and servo control from a Cortex M0](https://i.ytimg.com/vi/fgChU18a5vs/default.jpg)
![STM32F4 Discovery board - Keil 5 IDE with CubeMX: Tutorial 30 - FLASH Memory](https://i.ytimg.com/vi/RmRRPtxhCZE/default.jpg)
![stm32 development on Linux - installing stlink](https://i.ytimg.com/vi/5nr_3o7D1To/default.jpg)
![Real Time is Coming to Linux; What Does that Mean to You? - Steven Rostedt, VMware](https://i.ytimg.com/vi/BxJm-Ujipcg/default.jpg)
![STM32 #1: Программирование STM32 начало | HelloWorld | Linux и Windows #STM32](https://i.ytimg.com/vi/FmT1x3PHldk/default.jpg)
![STM32 dev board first steps (linux)](https://i.ytimg.com/vi/xsYIh1sunso/default.jpg)
![Linux Mint 20: My Top Linux Distro](https://i.ytimg.com/vi/Z_ZAH7LWl-o/default.jpg)
![Getting Started with STM8S using STVD and Cosmic C Compiler](https://i.ytimg.com/vi/fOQOH4A24DU/default.jpg)
![Sending data over USART | STM32 development on Linux | VIDEO3](https://i.ytimg.com/vi/Ldbe1rIgbxg/default.jpg)