How To Build A DIY CNC Router Part 1

This is part one of how I built my DIY CNC Router. In this video, I'll go through the building and the assembling process of the CNC frame. My goal for this video is not to provide every single step but to pass along my experience and to help inspire those out there with the interest and passion to build their own CNC machine.
Materials use in this video are available on Amazon:

600mm 2040 Aluminum Profile Extrusion
800mm 2080 Aluminum Profile Extrusion
HSR Linear Guide Rail

M4-0.7 x 14mm Socket Head Cap Screws Bolts
M4 T Slot Nuts
M5 x 25mm Socket Head Cap Screws Bolts

M5 T Slot Nuts
Combination Drill & Tap Bit Set
Hole Saw Cutter
Digital Angle Gauge
Metric Standard Tape Measure
Ear Protection
Adjustable Circle Hole Cutter
Angle Finder
The Home Depot:
3/4 Birch Plywood
11-1/2'' 48'' Solid Pine Edge Glued
Software:

Wonder-share Filmora9 (Video Edit)
Fusion360 (3D Modeling software)
Check out my previous videos:

Watch the part 1 of HOW TO BUILD A CNC ROUTER ➡
https://youtu.be/pCdERYTxAk8

Watch the part 2 of HOW TO BUILD A CNC ROUTER ➡
https://youtu.be/9V_8xdStZRg

Watch the part 3 of HOW TO BUILD A CNC ROUTER ➡
https://youtu.be/hLIeNe8eVFI

Watch the part 4 (TEST CUTS ON DIFFERENT MATERIALS) ➡
https://youtu.be/BsymncpALA0

Watch Can This DIY CNC Router Cut Steel? ➡
https://youtu.be/SM9agfrE8BY

Watch my previous video on CIRCULAR SAW CROSSCUT JIG ➡ https://www.youtube.com/watch?v=EEsJKwq9vng&t=331s
If you are new to my channel, please subscribe and hit the notification bell icon so that you don't miss part 2 of this video and my future DIY videos. CLICK HERE TO SUBSCRIBE ➡ http://bit.ly/VulecoSubscribeNow

Видео How To Build A DIY CNC Router Part 1 канала VULECO DIY