Suzuki Samurai Steering for the Custom DIY 4x4 Mini Grave Digger Powerwheels Monster Truck Build

Episode 8 of the Custom DIY Mini Grave Digger Monster Truck Power Wheels Build.

This is the 8th video in our build series for our modded 4wd Powerwheels Mini Grave Digger Monster Truck.

In this video we start the steering setup for this monster truck. We put a stock Suzuki Samurai Steering Gearbox on the Axle. Yes, mounted to the axle housing!!! Watch the video, you'll see why....
.
In the next video we will add EPS, Electric Power Steering.

We are going to build a tubing frame for it and hang mini truck axles and a gas engine in it. It will ride on Goodyear Super Terra tires that are 31 inches tall. A SAS Solid Axle Swap on a Power Wheels! It will be geared low, so no high speed thrills, but it will be able to crawl over obstacles. The rear axle will be a narrowed dana44 and the front axle will be a Suzuki Samurai narrowed axle. It will feature linkage suspension and some coil over shocks. It will be a blast to have a truly 4wd modified Power Wheels sitting on monster sized tires. The boys are super excited for this build.

This is not a crazy fast build like the guys over at Grind Hard Plumbing are doing. This is a much more tame build for kids. But rest assured, it will be epic for the little guys!!

Thanks for watching!
Here's a Link to Mike at DIY Motorsport:
https://www.youtube.com/channel/UClSTEhweXd2QZ0DmxhylQmA

Chris at Rather B Welding: https://www.youtube.com/channel/UC7XeInsW-VFmTwMU5B7Q_XA

Ethan and Edwin at Grind Hard Plumbing Company: https://www.youtube.com/channel/UCivi_f1nniBzEOfKhRoN12Q

Clinton at Dirt Garage: https://www.youtube.com/channel/UCDCqxFglNKQ4oiQEjCkRTew

Steve at Hessick Moto: https://www.youtube.com/channel/UCZQV65v0kPH7HPBDNZxjqow

Видео Suzuki Samurai Steering for the Custom DIY 4x4 Mini Grave Digger Powerwheels Monster Truck Build канала Moto Mule