The PROTOTYPE that never came to be! 2000 Mustang Cobra R Splitter Support Brace - Review & Install
Alright, here us out. Yes, we developed a part for the 2000 Cobra R that at the time of this video is 23 years old. However, we felt that this needed to exist for a few reasons. One, it proves our commitment to the cars; regardless of their age and production numbers. Two, we wanted all of our "2000 Cobra R friends" to have the ability to purchase a splitter support brace that should have been offered back when these cars were new.
Well, here we are. Insert LMR's 2000 Cobra R splitter support brace that is modeled after a prototype piece from the early 2000s. This will reinforce and strengthen the front bumper and splitter on a 2000 Cobra R or a car with a Cobra R-style front splitter with the rearward bracket.
2023 Cruise-in Information: https://lmr.com/products/lmr-cruise-in-2023
*Shop*
Splitter Support Brace: https://lmr.parts/LRS-16601R
Header Panel Repair Kit: https://lmr.parts/LRS-8284RFMT
Radiator Cover Hardware: https://lmr.parts/HDW-8291B-K
*Tool List*
Lift or Jack & Jack Stands
Microfiber Towels
Heat Gun
Drill
1/8" & 1/4" Drill Bits
WD-40 (Or similar lubricant)
Touch-up Paint
Push Pin Removal Tool
Phillips Head Screwdriver
Dzus Fastener Tool (Coin or something similar)
1/4" Socket Wrench
5.5mm Socket
4mm Hex Bit Socket
*Chapters*
00:05 - Video Introduction & Back Story
00:44 - Car #45 & LMR Cruise-in Information
01:46 - Splitter Support Brace Specifications
03:11 - Support/lift the Vehicle
03:26 - Release the Dzus Fasteners & Remove the Splitter
04:36 - Splitter Support Brace Mock-up
05:30 - Mark & Drill the Holes in the Rearward Bracket
07:43 - Prepping & Painting the Rearward Bracket
08:27 - Open the Hood & Remove the Radiator Cover
09:37 - Installing the Heat Shrink
10:45 - Installing the Splitter Support Brace
15:12 - Reinstalling the Splitter
16:25 - Reengage the Dzus Fasteners
17:04 - Installing the Rearward Support Brace Bolts
17:53 - Pulling the Slack Out of the Cables
19:28 - Final Thoughts & Outro
#lmr #mustang #cobra
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer
Видео The PROTOTYPE that never came to be! 2000 Mustang Cobra R Splitter Support Brace - Review & Install канала Late Model Restoration (LMR)
Well, here we are. Insert LMR's 2000 Cobra R splitter support brace that is modeled after a prototype piece from the early 2000s. This will reinforce and strengthen the front bumper and splitter on a 2000 Cobra R or a car with a Cobra R-style front splitter with the rearward bracket.
2023 Cruise-in Information: https://lmr.com/products/lmr-cruise-in-2023
*Shop*
Splitter Support Brace: https://lmr.parts/LRS-16601R
Header Panel Repair Kit: https://lmr.parts/LRS-8284RFMT
Radiator Cover Hardware: https://lmr.parts/HDW-8291B-K
*Tool List*
Lift or Jack & Jack Stands
Microfiber Towels
Heat Gun
Drill
1/8" & 1/4" Drill Bits
WD-40 (Or similar lubricant)
Touch-up Paint
Push Pin Removal Tool
Phillips Head Screwdriver
Dzus Fastener Tool (Coin or something similar)
1/4" Socket Wrench
5.5mm Socket
4mm Hex Bit Socket
*Chapters*
00:05 - Video Introduction & Back Story
00:44 - Car #45 & LMR Cruise-in Information
01:46 - Splitter Support Brace Specifications
03:11 - Support/lift the Vehicle
03:26 - Release the Dzus Fasteners & Remove the Splitter
04:36 - Splitter Support Brace Mock-up
05:30 - Mark & Drill the Holes in the Rearward Bracket
07:43 - Prepping & Painting the Rearward Bracket
08:27 - Open the Hood & Remove the Radiator Cover
09:37 - Installing the Heat Shrink
10:45 - Installing the Splitter Support Brace
15:12 - Reinstalling the Splitter
16:25 - Reengage the Dzus Fasteners
17:04 - Installing the Rearward Support Brace Bolts
17:53 - Pulling the Slack Out of the Cables
19:28 - Final Thoughts & Outro
#lmr #mustang #cobra
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer
Видео The PROTOTYPE that never came to be! 2000 Mustang Cobra R Splitter Support Brace - Review & Install канала Late Model Restoration (LMR)
Показать
Комментарии отсутствуют
Информация о видео
19 мая 2023 г. 20:22:25
00:20:09
Другие видео канала
![DCR Mustang Fox Body Coupe Quarter Window Replacements (87-93) - Install & Review](https://i.ytimg.com/vi/QQ2xtLPu1YI/default.jpg)
![SVE Fuel System For Coyote Swapped Fox Body Mustangs | Complete Overview](https://i.ytimg.com/vi/vtYzBZpuJYA/default.jpg)
![How To Remove & Install Mustang Inner Door Handle Bezel - (79-93)](https://i.ytimg.com/vi/Zq2ig6SMbR8/default.jpg)
![Fox Body Mustang Map Pocket Installation - (90-93)](https://i.ytimg.com/vi/90VaY4GZmjU/default.jpg)
![How To Remove Fox Body Mustang Factory Air Box (1986-93)](https://i.ytimg.com/vi/yuuqPlIN0sw/default.jpg)
![Project Keeping Comp | Ep: 7 - Finishing Touches](https://i.ytimg.com/vi/7hqe9Okh3z0/default.jpg)
![You ASKED, we LISTENED! Fox Body Mustang 5.0 Resto® 17" 10-Hole Wheels - Review (1979-1993)](https://i.ytimg.com/vi/0cjiwUFZg_s/default.jpg)
![How To Remove & Install Fox Body Mustang Door Armrest Plug - (87-93)](https://i.ytimg.com/vi/UuG4-xqi46I/default.jpg)
![What’s your favorite Fox Body? #latemodelresto #shorts](https://i.ytimg.com/vi/DJ_KsKtbzkg/default.jpg)
![1992-1996 Ford OBS Bronco: How To Remove & Install Headlight Bezels](https://i.ytimg.com/vi/zH8h7-10Giw/default.jpg)
![This is SILLY... We DYNO the HAWT BOXXX Upper Intake Manifold!](https://i.ytimg.com/vi/JAtapkSpqGM/default.jpg)
![Top to body weatherstrip install - 1992-1996 OBS Bronco - Part 1 #latemodelresto](https://i.ytimg.com/vi/abpR6TSjd7I/default.jpg)
![How To Install SN95/New Edge Mustang Door Bumpers (94-04)](https://i.ytimg.com/vi/YAlHIjqGEe4/default.jpg)
![Here are the results of our 141 miles Boss 302 on the dyno! #latemodelresto #shorts](https://i.ytimg.com/vi/_47Yk8uSZy0/default.jpg)
![How To Install 5.0Resto Fuel Tank Strap Stud Kit (81-04)](https://i.ytimg.com/vi/zP00_L0OEYQ/default.jpg)
![1979-2004 Mustang SVE Front Urethane Spring Isolators - Review](https://i.ytimg.com/vi/Vm0SE_oL75Y/default.jpg)
![2005-2009 Mustang GT Series 3 Chin Spoiler - Review & Install](https://i.ytimg.com/vi/I0v4IIrDrZk/default.jpg)
![How To Install Fox Body Mustang Front Seat Belt Quarter Panel Clip (83-86)](https://i.ytimg.com/vi/GnKD-dFiLSY/default.jpg)
![New Edge Mustang Rear Upper Window Molding (99-04) - Review](https://i.ytimg.com/vi/bxSk5D8c47w/default.jpg)
![Texas DPS Mustang Coupe - Jmac at LatemodelRestoration.com](https://i.ytimg.com/vi/aSOdiNbM4uI/default.jpg)
![1979-2004 Mustang SVE Rear Urethane Spring Isolators - Review](https://i.ytimg.com/vi/EYOeFA2rVIA/default.jpg)