#101 Using a Friction Drive to Finish Bowl Bottoms Professionally. Woodturning DIY Project

In this video, I take a look at making and using a friction drive for removing the chucking method used when woodturning bowls, and in particular, recesses. This method can also be used for reverse mounting bowls with tenons, or pieces that are not able to be reverse mounted onto cole jaws or in a longworth chuck.
For the friction drive chucking method, I used a 100x100x75,, (4x4x3") beech spindle blank which was then covered with a piece of neoprene approximately 100x100mm (4x4"). There is also a small cube with a tiny piece of neoprene on, too.

This is the first video using my permanent filming and live demo set-up and it features the excellent Vicmarc VL300 lathe that is available from Simon Hope at www.hopewoodturning.co.uk.

**********************************
Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and Tips:
http://www.msabansmith.com
**********************************
Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com
**********************************
Find Me on Other Social Media
Facebook: http://www.facebook.com/msabansmith
Twitter: http://www.twitter.com/msabansmith
Google+: https://plus.google.com/+Msabansmith/
Instagram: https://instagram.com/msabansmith
***********************************

*** Small Print and Disclaimer: Woodturning can be dangerous. The project in this video is a demonstration of a woodturning project suitable for beginners and is not intended to replace a physical lesson from an experienced woodturner.

At all times, you are responsible for your own safety, that of your workshop and other people in it. Ensure you wear suitable personal safety equipment at all times.

This is my way of turning this project - Other turners may turn it differently and you may find your own way of reaching the same result.

By copying these techniques, you do so at your own risk.

Please note that I am not sponsored by any of the companies or products linked to in the 'Useful Links' section. Nor do I necessarily endorse them.

Thank you for your understanding.

Видео #101 Using a Friction Drive to Finish Bowl Bottoms Professionally. Woodturning DIY Project канала M. Saban Smith Woodturning