Cannon Digital Gun Safe Fail Fix! Locked Out! Don't Drill - TRY THIS FIRST!

I found a good way to fix my Cannon Digital Gun safe fail. The digital keypad died and I was locked out. Fresh batteries didn't help, it was dead. But I found a way to fix it without drilling the safe! I called Cannon and they agreed to send me a new lock. They also told me I would have to get the safe drilled. I called a local safe expert who quoted me $400-$800 to drill the safe.
I would rather buy a new safe! So, I did some research and found out how to fix this without drilling the gun safe! They told me, "Don't drill, try this first" and it worked!

***Note - This is not a video on how to break into a Safe, it assumes the safe is yours and you know the old combination***

Visit our Amazon storefront to see what tools and materials I use in most of my projects:
https://www.amazon.com/shop/josesextremediy
This helps support our channel as we earn commissions from sales.

Here's is a paid link to the dehumidifier I mentioned in the video: https://amzn.to/2M8POYl

Here is a link to a LaGard 5715SC Panel. This is the same company that gave me the technical advice on how the digital locks work and the solution I used.

https://mbausa.com/1-battery-keypad-satin-chrome/

Here is a link to the written version of this video: https://bit.ly/3pFuLLJ

Check out our DIY Website https://extremediy.org

Contents:
0:00 Introduction
0:35 How the Safe Keypad Failed
0:55 800 Dollars to Drill the Safe!
1:30 How to Remove the Old Keypad
3:05 Explanation of Lock Cable
4:46 New Keypad Arrived!
6:55 Testing the New Keypad
8:41 Mounting the New Keypad
12:15 Why You Shouldn't Drill a Safe

#GunSafe
#GunSafeFailure
#FixGunSafe

Видео Cannon Digital Gun Safe Fail Fix! Locked Out! Don't Drill - TRY THIS FIRST! канала Jose's Extreme DIY