8. Network Automation Data Structure
https://rayka-co.com/lesson/network-automation-data-structure/
Network automation data structure for separating data and configuration is what we discuss in this module.
Each configuration has some data that may be different or the same between devices. SNMP community, IP address of NTP servers, network addresses in EIGRP configuration and IP address and AS number of neighbors in BGP configuration are some examples of data in network automation.
How to store and access the data of the configuration of various network devices is what we call network automation data structure
In this section, we use inventory files to store and access the configuration data as well.
But in the next section we will store and access data of configurations via its own specific data structure.
Видео 8. Network Automation Data Structure канала RAYKA
Network automation data structure for separating data and configuration is what we discuss in this module.
Each configuration has some data that may be different or the same between devices. SNMP community, IP address of NTP servers, network addresses in EIGRP configuration and IP address and AS number of neighbors in BGP configuration are some examples of data in network automation.
How to store and access the data of the configuration of various network devices is what we call network automation data structure
In this section, we use inventory files to store and access the configuration data as well.
But in the next section we will store and access data of configurations via its own specific data structure.
Видео 8. Network Automation Data Structure канала RAYKA
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![8. Monitoring and Troubleshooting Security Policies on Juniper SRX](https://i.ytimg.com/vi/qpBeZEitiEs/default.jpg)
![11. Juniper SRX IDP Configuration](https://i.ytimg.com/vi/i1ewFxkswkM/default.jpg)
![4. Nornir Netmiko send command Configuration Example](https://i.ytimg.com/vi/an4ddZT4-PY/default.jpg)
![13. Cisco FTD SSL Decryption](https://i.ytimg.com/vi/24HKR_8xYHM/default.jpg)
![5. netconf get-config code example](https://i.ytimg.com/vi/Bt3am2i07LM/default.jpg)
![25. Firepower Sensitive Data Detection](https://i.ytimg.com/vi/MLHN3BtceaU/default.jpg)
![25. Juniper Unicast Reverse-Path-Forwarding](https://i.ytimg.com/vi/qI6ucofPNzs/default.jpg)
![29. Juniper SRX Enhanced Web Filtering Configuration](https://i.ytimg.com/vi/fWrlZcu2Xwk/default.jpg)
![28. Juniper SRX Web Filtering Local and Redirect Configuration](https://i.ytimg.com/vi/Tbijw2P5QMA/default.jpg)
![18. juniper qualified-next-hop and route prefrence](https://i.ytimg.com/vi/a7CJGn8Usgk/default.jpg)
![24. cisco SD-WAN Traffic Shaping](https://i.ytimg.com/vi/19Rrz-2nPfE/default.jpg)
![17. edit config with yaml payload in restconf protocol](https://i.ytimg.com/vi/WLgbAS7u4_A/default.jpg)
![13. Segment Routing Multi Domainwith PCE Part1](https://i.ytimg.com/vi/WkJ9bqaH_AY/default.jpg)
![16. Nornir Napalm Validate to check Compliance](https://i.ytimg.com/vi/dULu4cKnFtA/default.jpg)
![27. pygnmi to subscribe data and update the configuration](https://i.ytimg.com/vi/PlUpcKXmxvU/default.jpg)
![9. juniper initial configuration](https://i.ytimg.com/vi/zJlevl0TWC0/default.jpg)
![29. Cisco FTD High Availability Configuration](https://i.ytimg.com/vi/YDYSt6fChYI/default.jpg)
![5. introduction to cisco-specific Ansible Nework Modules](https://i.ytimg.com/vi/8G6acD93R1I/default.jpg)
![18. cisco nso restconf examples with postman](https://i.ytimg.com/vi/jKb0p0Dtehw/default.jpg)
![16. Segment Rouing ODN with Flex Algo Configuration](https://i.ytimg.com/vi/F1iclOSb_HM/default.jpg)