Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

Reassembling an old lathe - Part 3/3 - The Headstock

After de-rusting, painting and some galvanisation I'm starting to put back together the old lathe that I showed you in the mystery machine video. In this part I reassemble the Headstock.

Part 1/3 - https://youtu.be/ZZShQo5YmAw
Part 2/3 - https://youtu.be/8ShciBpXePk

Mystery machine video: https://youtu.be/SgdVKXLkd2A

Want to support my video efforts, you could buy some shit through my Ebay and Banggood affiliated links below :)

some products I really like:
CCMT inserts: https://ebay.to/2MHIqz3
Diamond hone: https://www.banggood.com/custlink/Gv3DeZsIkT

Rolingmetal community tab: https://bit.ly/2TkLrH0
Rolingmetal photo album: https://bit.ly/2KQJIdu

Видео Reassembling an old lathe - Part 3/3 - The Headstock канала Rolingmetal
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
8 ноября 2016 г. 20:54:47
00:17:43
Rolingmetal
Теги
Правообладателям
Жалоба
Комментарии
Другие видео канала
So I bought a latheSo I bought a latheTesting some hacksaw metal cutting bladesTesting some hacksaw metal cutting bladesSome modification to the old latheSome modification to the old latheA wood lathe updateA wood lathe updateBunch of stuff that came with an old latheBunch of stuff that came with an old latheMy first wood chips everMy first wood chips everVintage Karger lathe sliding spindle teardownVintage Karger lathe sliding spindle teardownThreading frozen woodThreading frozen woodThe Oscar Ehrlich Lathe anniversary remake video and a state of the channel speechThe Oscar Ehrlich Lathe anniversary remake video and a state of the channel speechA new challenge and some questions about a dilapidated Cushman chuckA new challenge and some questions about a dilapidated Cushman chuckCan it be welded, and can I do it?Can it be welded, and can I do it?Turning a pointy bit on the vintage Karger lathe (short edit)Turning a pointy bit on the vintage Karger lathe (short edit)Maxing out my vintage hydraulic hacksawMaxing out my vintage hydraulic hacksawTurning metal before the wood - Part IITurning metal before the wood - Part IIFixing up the woodlathe toolrestFixing up the woodlathe toolrestTurning metal before the wood - Part ITurning metal before the wood - Part IMaking HSS boring barMaking HSS boring barAmateur struggles to turn the outside of a bowl blankAmateur struggles to turn the outside of a bowl blankObscure Dutch lathe that's a bit of an oddballObscure Dutch lathe that's a bit of an oddballReassembling an old lathe - Part 1/3 - The TailstockReassembling an old lathe - Part 1/3 - The Tailstock
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала