Sanding veneered MDF; how long before it goes wrong? [video # 346]
In this video I attempt to show how I go about #sanding #veneered #MDF and explain why it’s no big deal as long as you keep moving - and keep an eye on the time. Enjoy!
N.B.This is not a definitive test, and results will vary depending on the sander/abrasive/veneer used; always run a test on a piece of scrap before starting on the workpiece. 👍
Tests we’re run with a fresh piece of Festool Granat P120 abrasive, and all sanders set at speed setting 4-5.
+++++++
My ‘social’ links in one place - http://bit.ly/10minute-links
Support me directly - http://bit.ly/donate_to_10minuteworkshop
Support me on Patreon - http://www.patreon.com/10minuteworkshop
Full list of ‘Stuff I use’ at http://bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram - @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool Rotex 125 - https://amzn.to/2QJvZUx (US: https://amzn.to/2OHYP5N)
Festool ETS 125 - https://amzn.to/2RSAEDD (US: https://amzn.to/2JZy0t5)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Osmo Polyx Oil - https://amzn.to/2Ot0NaW (US: https://amzn.to/2pdRjoS)
Other handy stuff:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Moldex 6810 in-ear defenders - http://amzn.to/2sTwQJE (US:http://amzn.to/2sThGo1)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Mirok square - https://etsy.me/2MC0RTZ
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Mirock square - https://etsy.me/2MC0RTZ
Plastic packers - http://amzn.to/2vCDN27 (US:http://amzn.to/2vHk4fZ)
Moldex 6810 in-ear defenders - http://amzn.to/2sTwQJE (US:http://amzn.to/2sThGo1)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Braided hose sleeve - http://amzn.to/2puFkWd (US:http://amzn.to/2oqbQsi)
Polyvine PolyTen PVA - https://amzn.to/2HBxK66 (US: http://amzn.to/2rmHYL3)
+++++++++
Видео Sanding veneered MDF; how long before it goes wrong? [video # 346] канала Peter Millard
N.B.This is not a definitive test, and results will vary depending on the sander/abrasive/veneer used; always run a test on a piece of scrap before starting on the workpiece. 👍
Tests we’re run with a fresh piece of Festool Granat P120 abrasive, and all sanders set at speed setting 4-5.
+++++++
My ‘social’ links in one place - http://bit.ly/10minute-links
Support me directly - http://bit.ly/donate_to_10minuteworkshop
Support me on Patreon - http://www.patreon.com/10minuteworkshop
Full list of ‘Stuff I use’ at http://bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram - @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool Rotex 125 - https://amzn.to/2QJvZUx (US: https://amzn.to/2OHYP5N)
Festool ETS 125 - https://amzn.to/2RSAEDD (US: https://amzn.to/2JZy0t5)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Osmo Polyx Oil - https://amzn.to/2Ot0NaW (US: https://amzn.to/2pdRjoS)
Other handy stuff:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Moldex 6810 in-ear defenders - http://amzn.to/2sTwQJE (US:http://amzn.to/2sThGo1)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Mirok square - https://etsy.me/2MC0RTZ
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Mirock square - https://etsy.me/2MC0RTZ
Plastic packers - http://amzn.to/2vCDN27 (US:http://amzn.to/2vHk4fZ)
Moldex 6810 in-ear defenders - http://amzn.to/2sTwQJE (US:http://amzn.to/2sThGo1)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Braided hose sleeve - http://amzn.to/2puFkWd (US:http://amzn.to/2oqbQsi)
Polyvine PolyTen PVA - https://amzn.to/2HBxK66 (US: http://amzn.to/2rmHYL3)
+++++++++
Видео Sanding veneered MDF; how long before it goes wrong? [video # 346] канала Peter Millard
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Oak and Birch ply drawers - too good for the workshop? [video 558]Pocket-money calibration stop made from scrap. #Festool #CSCSYS50 #CSCSYSFenceThe Bridle Joint; basic woodworking joints #basicwoodworking #woodworking #joineryBasic Woodworking Joints: the Half- lap #basicwoodworking #woodworking #diyBasic Woodworking Joints: the Rebate or #rabbet. #basicwoodworking #woodworkingIkea Hack! I Made these Shelves from 32 Year Old Billy Bookcases [video 532]More Festool Table Saw *plus* a DIY Flip Stop! [video 531)Festool's Big Mistake [video 530]Parkside 12v Planer, Mini Grinder, Drill/driver [Video 529]Finally! New saw, first cut. More to come on this. 👍#Festool #CSCSYS50 #TableSawIkea Hack! Wall Cabinets on the Floor?? [video 528]Paint Fast!Which Drawer Slide When? [video 527]Peter Millard is going live!Is Garnica #Globulus a real #BirchPly #Alternative?Birch Ply Alternatives? [video 527]Travel toolkits; something for the weekend?? [video 526]How I Fit Concealed Drawer Slides [video 524]The Triton Duo Doweller is too cheap... [video 523]5 Questions to Robin Clevett [video 522]How I Fit Double Extension Drawer Slides [video 521]