CANable open source CAN bus analyzer firmware

Here I will show you how to set up the CANable CAN bus adapter with custom firmware.

Here is more information on the CANable device https://canable.io/
You can buy it here https://store.protofusion.org/
I've bought mine from Aliexpress.com

You'll need STM32CubeIDE to compile and generate code from here https://www.st.com/en/development-tools/stm32cubeide.html
And to program the CANable you'll need CubeProgrammer from here https://www.st.com/en/development-tools/stm32cubeprog.html

You'll need to download some library files from here
https://github.com/karlyamashita/common_libraries
Save this folder to a location with no spaces in the path.

The original CANable project you can see here https://github.com/karlyamashita/CANable_USB_CAN

The CAN-X pc software is open source which you can get here
https://github.com/karlyamashita/CAN-X
You can also design your own CAN bus analyzer software. The messages sent back and forth between the CANable and PC is a simple message structure. See here https://github.com/karlyamashita/common_libraries/blob/master/UsbAndCanConvert.h
Some mistakes in the video:
• There was glitch in the video where several seconds were skipped somehow.
So at time 10:38 you're going to include the LSP.h file in the main.h file.
So type #include "LSP.h"
• At time 16:38 i said to move the jumper to the left. I meant to say move the jumper to the right.

Видео CANable open source CAN bus analyzer firmware канала EE by Karl