Volantex Ranger 2000 iNav Maiden Flight

This is the maiden flight experience for my recently completed Volantex Ranger 2000 build. Things could have gone better, but we all walked away with all of our fingers and toes!
My custom Ranger 2000 parts:
https://www.thingiverse.com/thing:4699465
bonafidepirate's Pan/Tilt mount for the RunCam Hybrid 4K:
https://www.thingiverse.com/thing:3937599
(I did a 'remix' of the above by adding a part to hold the tilt servo, see my custom parts)
See bonafidepirate's Jx Servo mod video:
https://www.youtube.com/watch?v=NQWjrw5xGAU
I took photos and videos of my servo modification process, but I have lost that directory! If I find it, I will make my own video of the experience. I have four more servo's to mod, so I'll record that processes someday. It is not for the faint of heart! Make sure you follow Keith's recommendation and use 1/8 watt resistors and cover them with heat shrink. Have some 30AWG silicone coated wire ready to replace the existing wire in the servo.
Component Listing:
Volantex Ranger 2000 Airframe Kit
Flight control:
Matek F722Wing FC
iNav 2.5.2 FW
RMRC Mini220 GPS
FrSky R9 Mini RX
Power system:

SunnySky 2216 1250KV Motor
APC 8x6 E Pusher Prop
HobbyWing Skywalker 50A ESC
Zippy Compact 3300Mah 4S 40C
FPV & HD video (and audio)

RunCam Hybrid 4K FPV & HD Cam
(on pan tilt)
Caddix Ant Aux Cam
(rear facing)
TBS Unify Pro32 HV VTX
Lumineer Axii RHCP Antenna
Servos:

JX Servo Pan Servo
w/ bonafidepirate 270˚ mod
bonafidepirate pan/tilt 3d printed mount
Emax ES08MDII Tilt servo
Corona DS919MG Flight control servos
More Videos on the Ranger 2000 to come....
Let me know in the comments what you would have done differently!
My other 3d airplane parts on Thingiverse:
https://www.thingiverse.com/dankrc/designs
Coming soon:
The Ranger 2000 canopy fix.

The FT Twin Explorer w/ carbon boom project.
Why do my RunCam HD on board recordings fail after 8 minutes?
...and more in 2021!
Thanks for watching!

Видео Volantex Ranger 2000 iNav Maiden Flight канала DankRC