200TDi Engine Startup (2012)
#LandRover #Series3 #Restoration #200TDi #FirstStart
This clip is from 2012 and shows the first time I started the 200TDi engine I had fitted to my Series 3 LWB...
"...tonight was a major milestone, as I got the engine up and running. And it was surprisingly easy. I had expected problems, as this engine has sat unused for two years. However, I connected the fuel line, filled up the radiator, applied power and it started, instantly..! I was amazed, completely amazed. I thought it would turn over for a few minutes before it decided to cough into life, but not after just one crank. Plus there was very little smoke, which was nice…"
See: https://m0xya.net/2012/03/14/542/
Видео 200TDi Engine Startup (2012) канала m0xya
This clip is from 2012 and shows the first time I started the 200TDi engine I had fitted to my Series 3 LWB...
"...tonight was a major milestone, as I got the engine up and running. And it was surprisingly easy. I had expected problems, as this engine has sat unused for two years. However, I connected the fuel line, filled up the radiator, applied power and it started, instantly..! I was amazed, completely amazed. I thought it would turn over for a few minutes before it decided to cough into life, but not after just one crank. Plus there was very little smoke, which was nice…"
See: https://m0xya.net/2012/03/14/542/
Видео 200TDi Engine Startup (2012) канала m0xya
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Quick Project: Delrin BushingsTool Grinder IntroductionMurphy's first ChristmasPedestal Grinder VFD ConversionBBC Master 128 - It has been over 30 years!BBC Master 128 - PiTubeDirect Raspberry Pi CoprocessorRapidor Manchester Restoration - IntroductionLand Rover Series 3 Lightweight Restoration: TeaserBuilding Project: Shed/Office TimelapseChuck Spanner BuildIt's alive..!Discovery 3: Write Off?Rapidor Manchester Restoration - Drive Shaft60 Second Sunday (05/09/2021)Tracer Unit Support Rests - Part 1: IntroductionQuick Tip: Baofeng InterfaceWelcomeRapidor Manchester Restoration - Vice Jaw Lead ScrewClarkson Tool & Cutter Grinder: IntroductionLand Rover Series 3 Lightweight Restoration: Update #1