Soldering copper pipe like a pro

If you're looking to learn how to soldering copper pipes, here's a step-by-step guide on how you can do it:

Materials:

Copper pipes
Copper fittings
Flux
Solder
Propane torch
Emery cloth or sandpaper
Pipe cutter
Pliers
Instructions:

Cut the copper pipe to the desired length using a pipe cutter. Ensure that the cut is clean and straight to ensure a good fit with the copper fittings.
Clean the ends of the copper pipe using emery cloth or sandpaper to remove any burrs or rough edges that may affect the fit.
Apply a thin layer of flux to the end of the copper pipe and the inside of the copper fitting. The flux helps to create a strong bond between the two pieces.
Slide the copper fitting onto the copper pipe, ensuring that it fits snugly.
Use pliers to hold the copper fitting in place, and apply heat from the propane torch to the joint. Move the flame around the joint evenly to ensure that it heats up evenly.
Once the joint is hot enough, touch the end of the solder to the joint, and allow it to melt and flow into the joint. Ensure that the solder flows evenly around the joint.
Once the joint is fully soldered, remove the heat and allow it to cool. Once cooled, wipe away any excess flux or solder residue with a cloth.
Repeat steps 3-7 for any additional joints.
Once all the joints are soldered and cooled, turn on the water supply to test for any leaks.
Tips:

Be sure to wear safety gear, such as safety glasses and gloves, when soldering.
Ensure that the copper pipes and fittings are clean and dry before applying flux.
Use a steady hand when applying heat to avoid scorching or damaging nearby surfaces.
Practice on scrap pieces of copper pipe and fittings before attempting to solder in a real-life scenario.
With these steps and tips, you can create a comprehensive video on how to solder copper pipes that will be helpful for those who want to learn this skill.

#soldering #howto #plumbing #soldier

Видео Soldering copper pipe like a pro канала Tap into plumbers