Segmented Rings with Trapezoid Shaped Wedges (35)
This video demonstrated the production of trapezoid shaped wedges for incorporation in segmented rings in wood turning projects. These wedges are produced on the band saw utilizing the Accu-Wedge system by tilting the band saw table 10 degrees. This video details the process of producing these wedges and segmented rings. Finally we demonstrate the slicing of the segmented wedges to produce unique pattern feature rings for you woodturning projects. Details at: www.accu-slice.com
Видео Segmented Rings with Trapezoid Shaped Wedges (35) канала Accu-Slice
Видео Segmented Rings with Trapezoid Shaped Wedges (35) канала Accu-Slice
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Dust Collection Nozzles for the Band Saw - 2.5" Hose Connection](https://i.ytimg.com/vi/PulJWNsjNIQ/default.jpg)
![Jig for Slicing Tapered Boards on the Band Saw - Producing some unique tapered joints.](https://i.ytimg.com/vi/G3UFJHXRk88/default.jpg)
![Secondary Dust Shield for the Accu-Wedge System](https://i.ytimg.com/vi/3_vau_TuRlo/default.jpg)
![3-D Printed Soft Jaws for a Kurt Vise](https://i.ytimg.com/vi/CycOH65fNJE/default.jpg)
![New Ramp for the Accu-Wedge System](https://i.ytimg.com/vi/ffSW8igZSoI/default.jpg)
![DMM Servo Motor Two-Piece Cable Connector Cases](https://i.ytimg.com/vi/09ouAqWxFWE/default.jpg)
![New Delrin Roller Bearings for the Accu-Slice Carriages - Machining, Installation and Testing](https://i.ytimg.com/vi/uzAW1Zns5GM/default.jpg)
![Part 1 -Segmented Wood Turning with the Accu-Wedge System - Development of the Accu-Wedge System](https://i.ytimg.com/vi/dtDQKJ_fqfI/default.jpg)
![Machining Long Bars on the Tormach Lathe and CNC Mill](https://i.ytimg.com/vi/bY4vLo5iFqw/default.jpg)
![Producing Segmented Tapered Staves - Slicing Tapered Slaves - Part 1](https://i.ytimg.com/vi/vugBadO5mAQ/default.jpg)
![Tormach 8L Lathe - Editing G-Code and System Parameters, Part 2](https://i.ytimg.com/vi/jZPhfn1ok1w/default.jpg)
![Machining the Accu-Slice Cam Nuts on the Tormach 8L lathe and CNC Mill](https://i.ytimg.com/vi/82Ymc7_WHSE/default.jpg)
![Tapered Screw Style Offset Cam Clamps](https://i.ytimg.com/vi/BdscnQML1CA/default.jpg)
![Rotating Carriage for Slicing Staves on the Band Saw](https://i.ytimg.com/vi/ubdmyfCELCc/default.jpg)
![Cutting Multi-Layered Staves on the Band Saw - Part 3](https://i.ytimg.com/vi/-4kItTdfnNI/default.jpg)
![Cutting Staves on the Band Saw for Segmented Woodturning - Part 2 - Improvements in Production](https://i.ytimg.com/vi/yJc7Fcwoe74/default.jpg)
![Cutting Staves on the Band Saw for Segmented Woodturning](https://i.ytimg.com/vi/_PubA2UK8qU/default.jpg)
![Segmented Base Rings for the Bottom of Bowls - Part 1](https://i.ytimg.com/vi/q742PGYDV6E/default.jpg)
![NEMA 24 End Plate for Open Builds C-Beam Linear Actuator](https://i.ytimg.com/vi/DpISoryx1ys/default.jpg)
![Ultimation Disc Sander Review - Sanding Segmented Wedges and Motor Addition](https://i.ytimg.com/vi/zI1D8xWF4fo/default.jpg)
![Automated Accu-Slice - Part 9 - System Design Completed - New Console and Testing](https://i.ytimg.com/vi/HguwEfwcS8A/default.jpg)