EFHW- End Fed Half Wave antenna EFHW-7510-2K 75-10M band for HAM radio

EFHW-7510-2K 75-10M band end fed half wave antenna for HAM radio

EFHW-7510-2K 2000W Multi-Band End Fed Half Wave Antenna
This is an End-Fed Half-Wave (EFHW*) antenna for 75/40/30/20/17/15/12 and 10m bands. Unlike many END FED antennas on the market, this one does not require the Antenna Tuner to operate.

*This is the perfect antenna for NVIS, MARS, ARES, EMCOMM, etc.

Various installations such as horizontal, vertical, as inverted V, as inverted L, etc. are possible. Measured VSWR in the gallery are taken with the antenna in an inverted L shape with the vertical side of 30 feet and a horizontal part remains at 30 feet above the ground. Your SWR values could vary with the way and height of installation.

NO TUNER needed!
NO counterpoise needed! (Grounding recommended*)
Frequency coverage: 3.5-30MHz
Resonant on 75/40/30/20/17/15/12/10m
Wire length ~132 feet
Power Handling: 2kW I.C.A.S
Stainless Steel hardware
Stealth #14 AWG black XLPE wire
Connector: Silver/Teflon SO-239

*Grounding at the transformer box or end of the coaxial cable is recommended for the protection of your equipment from an electrostatic buildup in order to prevent ESD- electrostatic discharge.

NOTE: grounding does not affect antenna tuning. If the transformer box is installed high above the ground, there is no need to route the ground wire from the box, instead just ground the coaxial cable at the entrance to your home or at the station.

Видео EFHW- End Fed Half Wave antenna EFHW-7510-2K 75-10M band for HAM radio канала Daniel Horvat