Part 7 – Fibreglass Basics – Glassing stringers - 1974 Sea Ray SRV 240 Weekender Re-build
Basic overview of working with fiberglass, what type of fiberglass cloth I use in my boat, and using polyester resin. A brief comparison of epoxy and polyester resins. Discussion of waxed and unwaxed (laminating) resin. A demonstration of applying fiberglass cloth and polyester resin to the stringers of a boat.
I also have a discussion at the end of the video covering how I initially tab the new stringers in my boat, including how I mix the thickened polyester resin to fill the gap between the bottom of the stringer and the fibreglass hull.
This is part 7 of an ongoing series of videos showing the complete rebuild of this boat - it was completely rotted when I started the work.
An earlier video shows how I built the stringers and floor in the cabin - see it here: https://www.youtube.com/watch?v=x8NO73NAvqo
See the removal of the rotten floor, stringers, and transom here: https://www.youtube.com/watch?v=UcDtxUo0e-g
If you find this video helpful, please subscribe!
Music: Outlet - Silent Partner https://youtu.be/W6c9F_CdvhU
Видео Part 7 – Fibreglass Basics – Glassing stringers - 1974 Sea Ray SRV 240 Weekender Re-build канала Zero_to_Floating
I also have a discussion at the end of the video covering how I initially tab the new stringers in my boat, including how I mix the thickened polyester resin to fill the gap between the bottom of the stringer and the fibreglass hull.
This is part 7 of an ongoing series of videos showing the complete rebuild of this boat - it was completely rotted when I started the work.
An earlier video shows how I built the stringers and floor in the cabin - see it here: https://www.youtube.com/watch?v=x8NO73NAvqo
See the removal of the rotten floor, stringers, and transom here: https://www.youtube.com/watch?v=UcDtxUo0e-g
If you find this video helpful, please subscribe!
Music: Outlet - Silent Partner https://youtu.be/W6c9F_CdvhU
Видео Part 7 – Fibreglass Basics – Glassing stringers - 1974 Sea Ray SRV 240 Weekender Re-build канала Zero_to_Floating
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Glassing in the stringers Part 3- BONUS PEANUT BUTTER Vlog #27](https://i.ytimg.com/vi/p0c6xKNw2vo/default.jpg)
![DIY FIBERGLASS BOAT BUILD (NEW COOSA BOARD STRINGERS ) PART 6](https://i.ytimg.com/vi/e1qj_x6AqBM/default.jpg)
![HOW TO REPAIR FIBERGLASS DAMAGE WITH LIMITED ACCESS!](https://i.ytimg.com/vi/4XoeGV2KhGc/default.jpg)
![Boat Transom and Floor Rebuild - Installing Marine Foam (2 of 2) - Part 57](https://i.ytimg.com/vi/OV3gNbn-aKY/default.jpg)
![Easy Tricks Using Fiberglass Strengthening!](https://i.ytimg.com/vi/3Pc-Sd_J26E/default.jpg)
![Water Drainage System Install Plus Glassing in Stringers and Frames //Project Glastron/Vlog #13](https://i.ytimg.com/vi/BUxR9mPp7Ew/default.jpg)
![How To Fiberglass Over Plywood](https://i.ytimg.com/vi/9jHUI0CiYbs/default.jpg)
![BUILDING BOAT STRINGERS | EP 3](https://i.ytimg.com/vi/dRn9SwcCX6I/default.jpg)
![Cutting Transom & Stringers - The NEW Fibreglass Boat Restoration Project - Part 4](https://i.ytimg.com/vi/Mrdh8Rjd1IA/default.jpg)
![[EP3] Fibreglass Boat Floor Replacement + Fibreglass Repairs - HAINES SIGNATURE 530F RESTORATION](https://i.ytimg.com/vi/XspkkZiF89U/default.jpg)
![The Haines Hunter 445F gets new glass stringers and Thermo-Lite flooring](https://i.ytimg.com/vi/iPPNAbZg9xI/default.jpg)
![DIY build of seating/storage in the front of The CC Boat Project 17](https://i.ytimg.com/vi/HoPUxeL7dnk/default.jpg)
![Fiberglassing A Composite Boat Transom! Start to Finish!](https://i.ytimg.com/vi/mJGhUgoDD3c/default.jpg)
![Boat Transom and Floor Rebuild - Using the Epoxy Thickening Compound - Part 46](https://i.ytimg.com/vi/vQlEeiFS7mI/default.jpg)
![SSTV 6-03 - Stringers & Below Deck Grid System/Fuel Tank Selection](https://i.ytimg.com/vi/usFXaFsRZYE/default.jpg)
![Bedding the stringers in the Sea Ray Restoration Part 1 Vlog #20](https://i.ytimg.com/vi/vzdhupvNPmA/default.jpg)
![Cutting Out And Replacing A Section Of Fiberglass Stringer!](https://i.ytimg.com/vi/lXkmalNFFDA/default.jpg)
![Cutting Out and Bedding The New Stringers // Project Glastron/Vlog #11](https://i.ytimg.com/vi/sJ33dWCQc9c/default.jpg)
![The TRANSOM is FINISHED! - The NEW Fibreglass Boat Restoration Project - Part 6](https://i.ytimg.com/vi/njscJIZz4rI/default.jpg)
![Fiberglassing the Deck in the Sea Ray 220 VLOG# 41](https://i.ytimg.com/vi/6grPTFgNaD0/default.jpg)