Carbon Fiber Wet Layup: Part 1
Relearning the composite wet layup process after 20 years. Part 1 covers cutting the carbon fiber and peel ply, waxing and PVA coating the surface the carbon fiber will be laid upon.
Part 2 covers the actual wet layup and peel ply wet-out, releasing the carbon fiber and removing the peel ply.
The ultimate reason for this piece of carbon fiber is for comparison testing with aluminum.
Patreon: https://www.patreon.com/ultralight_airplane_workshop
Facebook: https://www.facebook.com/UltralightAirplaneWorkshop
Website: https://www.thumpdataworks.com/UltralightAirplaneWorkshop
Music: https://www.bensound.com
Видео Carbon Fiber Wet Layup: Part 1 канала Ultralight Airplane Workshop
Part 2 covers the actual wet layup and peel ply wet-out, releasing the carbon fiber and removing the peel ply.
The ultimate reason for this piece of carbon fiber is for comparison testing with aluminum.
Patreon: https://www.patreon.com/ultralight_airplane_workshop
Facebook: https://www.facebook.com/UltralightAirplaneWorkshop
Website: https://www.thumpdataworks.com/UltralightAirplaneWorkshop
Music: https://www.bensound.com
Видео Carbon Fiber Wet Layup: Part 1 канала Ultralight Airplane Workshop
Показать
Комментарии отсутствуют
Информация о видео
15 сентября 2018 г. 3:28:13
00:32:35
Другие видео канала
Aero Terminology: Coefficient of Drag, Part 1Aluminum Wing Skin/Rib Rivet Load TestUWS-4 Flight Test: X-Plane 11 Flight Simulator, Stall, Max speed, StabilityAero Terminology: Interference Drag500 Subscriber T-Shirt Giveaway and Q&A AnnouncementUWS-1 Design: V Tail Load Part 2, Chord Load DistributionUWS-1 Design: Rudder Mold Part 3, Plug Cradle and Mold Surface FiberglassingUWS-4 Aero Design: Part 6b+, Tail GeometryUWS-4 Aero Design: Part5b, Wing Airfoil SelectionUWS-4 Aero Design: Part 9 Propulsion Re-analysisUWS-4 Frame Mockup: Part 3b, Roll Over Test and Results250 Subscriber T-Shirt Giveaway Winners Announcement and Q & AVacuum Bag Slit ExperimentFrom Selig Airfoil to Rib TemplateComposite Tip: HomeDepot Vacuum Bag Tacky TapeUWS4 Stuffing: Part 1 CabinTime Lapse of Vacuum Tubing PreparationUWS-4 Safety Design: Crashworthiness, Seat belts and ParachutesUWS 1 Design: Rudder Shape Part 2Aero Terminology: Coefficient of Drag, Part 2Aeropoxy PR2032/PH3663 for Resin Infusion