How to Install an Omnimeter Pulse v.4 Submeter on a Single Phase 120/240V 3-Wire Electrical System

This video provides one example of how to install a v.4 Omnimeter. It also describes how to read the meter with a computer with a direct connection, how to make meter settings, how to setup a wireless connection to read the meter remotely, and how to install the EKM Push gateway for cloud based data over the internet. Be sure to click the "Show More" tab for links to the products used in the video.

Video Parts:

Part 1 - The Products
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=0m31s

Part 2 - Enclosure Installation
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=2m09s

Part 3 - Testing, Pulling Wires, and Labeling
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=3m35s

Part 4 - Fuse Installation and Wiring the Breaker Panel
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=7m29s

Part 5 - Preparing the Meter
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=8m44s

Part 6 - Installing the Meter and Current Transformers
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=11m51s

Part 7 - Setting Up the USB Converter
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=16m35s

Part 8 - Making Meter Settings
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=18m13s

Part 9 - Installing 485Bee Radios and the EKM Push Gateway
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=22m23s

Part 10 - Software Options
https://www.youtube.com/watch?v=nvTTFxy_yQw&t=31m06s
Products Used:
Omnimeter Pulse v.4:
http://www.ekmmetering.com/ekm-omnimeter-pulse-v-4-pulse-counting-relay-controlling-universal-smart-electric-meter.html

2x SCT-013-200 Current Transformers:
http://www.ekmmetering.com/split-core-ct-200a-200a-26-6ma-13mm-0-51-hole-diameter-sct-013-200.html

UL Watertight Enclosure:
http://www.ekmmetering.com/ul-watertight-enclosure-172711.html

2x Fuse Holders with 1A Fuses:
http://www.ekmmetering.com/ekm-inline-fuse-holder-w-1-amp-fuse.html

EKM Push:
http://www.ekmmetering.com/ekm-push-communication-system.html

2x 485Bee Zigbee Radios:
http://www.ekmmetering.com/ekm-485bee-zigbee-wireless-adapter-for-rs-485-network.html

EKM Blink USB Converter:
http://www.ekmmetering.com/ekm-blink-rs-485-to-usb-converter.html

Sticker Label Sheet:
http://www.ekmmetering.com/sticker-sheet.html

CAT5e Cable:
http://www.ekmmetering.com/4-twisted-pairs-of-wire-cat5e-rs-485-shielded-stranded-pvc-cable-ftp-50-feet.html

Here are a couple links to the EKM Widget, displaying data for the meter that was installed:
http://widget.ekmmetering.com/EKM2/?reads=1000&key=MTAxMDoyMDIw&meter=350000900&scale=realtime&bar_graph_field=kwh_tot&compare=0&total_field=kwh_tot&kwh_tot_cost=.15&kwh_currency=USD&timezone=America~Los_Angeles&historical=Green

http://widget.ekmmetering.com/EKM2/?reads=30&key=MTAxMDoyMDIw&meter=350000900&scale=dy&bar_graph_field=kwh_tot&compare=0&total_field=kwh_tot&kwh_tot_cost=.15&kwh_currency=USD&timezone=America~Los_Angeles&historical=Purple

Feel free to contact us at info@ekmmetering.com if you have any questions about this video, or about our products and services.

Thanks again for watching!

Видео How to Install an Omnimeter Pulse v.4 Submeter on a Single Phase 120/240V 3-Wire Electrical System канала EKMMetering