Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

Fitting The DMC 250-111 Quick Change Tool Post To My Lathe. From Failing To Success.

In this video i'am starting to fit the Machifit DMC 250-111 Quick Change Tool Post to my lathe. My lathe is a Paulimot PM2500. I had quiet the rough time machining just the bolt to fit my topslide. I made mistakes, repaired them, failed again but finished the part in the end. Witness my journey to become a better machinist und learn from my mistakes.
The modification of the topslide will be the next video.

Видео Fitting The DMC 250-111 Quick Change Tool Post To My Lathe. From Failing To Success. канала Basement Projects
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
1 июля 2020 г. 0:47:52
00:05:57
Basement Projects
Правообладателям
Жалоба
Комментарии
Другие видео канала
TS-210 Part 11: Quick Change Tool PostTS-210 Part 11: Quick Change Tool PostMaking Quick Change Tool Holders For The LatheMaking Quick Change Tool Holders For The LatheMy First Impression Of The Machifit QCTP DMC 250-111My First Impression Of The Machifit QCTP DMC 250-111DMC-250-111 Machifit Toolpost Review & My Myford ML7 Fixture TestDMC-250-111 Machifit Toolpost Review & My Myford ML7 Fixture TestQuick And Reliable Height Adjustment For Lathe Tools.Quick And Reliable Height Adjustment For Lathe Tools.The knobs and levers on a 1953 Boxford Model A lathe similar to many other brands of metal lathes.The knobs and levers on a 1953 Boxford Model A lathe similar to many other brands of metal lathes.Installing a Machifit Quick Change Tool Post on the CJ0618 Lathe and Banggood Tool Post ReviewInstalling a Machifit Quick Change Tool Post on the CJ0618 Lathe and Banggood Tool Post ReviewБыстросменный резцедержатель часть 1Быстросменный резцедержатель часть 1Update to tool setting gaugeUpdate to tool setting gaugeWhere Have I Been...What's The Plan...And Your OpinionWhere Have I Been...What's The Plan...And Your OpinionMachifit DMC-250-000 Cuniform GIB Type Quick Change Tool Post QCTP [unbox / review / first test]Machifit DMC-250-000 Cuniform GIB Type Quick Change Tool Post QCTP [unbox / review / first test]Fitting A Machifit 250-100 Piston Toolpost On The Myford ML7Fitting A Machifit 250-100 Piston Toolpost On The Myford ML7Chinese Made Quick Change Tool Post QCTP unboxing | Install | AdjustmentChinese Made Quick Change Tool Post QCTP unboxing | Install | AdjustmentFrom imperial scraptonium to a metric tumbscrew boltFrom imperial scraptonium to a metric tumbscrew boltQCTP Tool Holders for the LatheQCTP Tool Holders for the LatheMaking A Steel Quick Change Tool Post And Tool Holders For The Mini LatheMaking A Steel Quick Change Tool Post And Tool Holders For The Mini LatheTaking Apart a Quick Change Tool Post - Viewer Question AnsweredTaking Apart a Quick Change Tool Post - Viewer Question Answeredmaking a 12mm boring bar holder (short version)making a 12mm boring bar holder (short version)Machining A Threading Die Holder For My Lathe TailstockMachining A Threading Die Holder For My Lathe TailstockGrizzly G4000, 9x20 lathe, quick change tool post installation, AXA Wedge StyleGrizzly G4000, 9x20 lathe, quick change tool post installation, AXA Wedge Style
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала