"How to" Install 4th Gen Trans Am Harley Fog Light Mod and Morimoto Halos
I installed some 4.5" LED fog lights which some refer to the Harley fog light mod. I topped them off with some 120mm Morimoto RGB halos to use as running lights, turn signals, and car show lights.
Here is a link for the fog lights I purchased:
https://www.amazon.com/gp/product/B01M3SFRLD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
You can also buy them with a built in white halo for about the same price.
This job will require some metal cutting, drilling and tapping threads. I used a M5 tap for a 25mm x M5 bolt. I also used ½” spacers. I couldn’t find metal ones so I used plastic spacers. The 120mm Morimoto RGB halos are attached with silicone. You can also just buy the switchback halos that do amber and white to save some money if you don’t need the color changing ability for car shows. It took me about 45 minutes per halo to install so overall the job was pretty fast. The light output of the halos alone is incredible and nice and low to the ground so they don’t blind anyone. The connector on the halo plugs directly into the factory wiring. Be sure to match up the wire colors when plugging them in (black to black), (red to purple). The plug goes in both ways. Test the make sure they light before bolting everything back up.
Видео "How to" Install 4th Gen Trans Am Harley Fog Light Mod and Morimoto Halos канала Jason Firebird
Here is a link for the fog lights I purchased:
https://www.amazon.com/gp/product/B01M3SFRLD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
You can also buy them with a built in white halo for about the same price.
This job will require some metal cutting, drilling and tapping threads. I used a M5 tap for a 25mm x M5 bolt. I also used ½” spacers. I couldn’t find metal ones so I used plastic spacers. The 120mm Morimoto RGB halos are attached with silicone. You can also just buy the switchback halos that do amber and white to save some money if you don’t need the color changing ability for car shows. It took me about 45 minutes per halo to install so overall the job was pretty fast. The light output of the halos alone is incredible and nice and low to the ground so they don’t blind anyone. The connector on the halo plugs directly into the factory wiring. Be sure to match up the wire colors when plugging them in (black to black), (red to purple). The plug goes in both ways. Test the make sure they light before bolting everything back up.
Видео "How to" Install 4th Gen Trans Am Harley Fog Light Mod and Morimoto Halos канала Jason Firebird
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BEST HEADLIGHTS EVER! Late model LED’sHow To Make: Light Up Rear Center Panel For 93-02 Trans Am!We Put The BEST LED Headlights In This OLD Trans Am! SHOCKING DIFFERENCE!MAJOR LED Fog Light Upgrade for $39.00 + SUBSCRIBER GIVEAWAY!Why exactly does the CAR WIZARD not like the CarTrek 6 2000 Pontiac Firebird WS6? //Sneak peak\\Cammed LS1 Trans Am Walk Around4l80e Swap Guide for 4th Gen Fbody featuring Vasko Speed!Replacing the dash pad in my 4TH GEN Trans AmPontiac Trans Am Terminator LED headlight and halo fog light installDodge Demon Who? My 1000 Horsepower Turbo Trans Am Has A Much Faster Evil Twin.Firebird Pop Up Headlights & 5x7 LED Headlight Conversion UpgradeHow To Fix A Headlight Motor On A Firebird Trans am and Corvette YourselfIn Depth Look At My TRANS AM DRIFT CAR!4th Gen Trans Am Front Sequential LED Turn SignalsTFS: DIY Custom Exhaust from ScratchThe Greatest Trans Am Ever Built? 7 foot wide, 700hp, 10,000rpm Track RipperS2E11: We take the 420cc fuel injected supercharged intercooled street legal go kart to 70 MPHG35 HALO TAIL LIGHT MOD STEP BY STEP 🔥Morimoto Headlghts and Fogs 4th Gen RAM INSTALL!!98 Formula WS6 1LE: The Pursuit